Massey Ferguson GC1715

Massey Ferguson GC1715The Massey Ferguson GC1715 is a 4WD sub-compact utility tractor from the GC1700 series. This tractor has been manufactured by Iseki for Massey Ferguson since 2013. The MF GC1715 is equipped with a 1.1 L (68.5 cu·in) three-cylinder diesel engine and a hydrostatic transmission with infinite (2-range) forward and reverse gears.

The Massey Ferguson GC1715 sub-compact utility tractor used the Iseki engine. It is a 1.1 L, 1,123 cm2, (68.5 cu·in) three-cylinder natural aspirated diesel engine. This engine produced 24.9 PS (18.3 KW; 24.5 HP) at 3,000 rpm of horsepower and 19.9 PS (14.6 KW; 19.6 HP) of PTO output power.

The MF GC1715 is equipped with hydrostatic power steering, wet disc type brakes, two-post ROPS, and 25.0 liters (6.6 US gal.; 5.5 Imp. gal) fuel tank.

Following attachments are available for the Massey Ferguson GC1715 sub-compact utility tractor:

  • Mid-mount Massey Ferguson 2315 54 in (1,370 mm) mower deck
  • Mid-mount Massey Ferguson 2320 54 in (1,370 mm) mower deck
  • Mid-mount Massey Ferguson 2326 60 in (1,520 mm) mower deck
  • Massey Ferguson DL100 loader
  • Massey Ferguson DL95 loader

Massey Ferguson GC1715 Specifications

General Specifications
ModelMassey Ferguson GC1715
Length2,470 mm (97.2 in)
Width1,200 mm (47.2 in)
Height1,840 mm (72.4 in)
Wheel base1,450 mm (57.1 in)
Ground clearance170 mm (6.7 in)
Weight650 kg (1,433 lbs)
Fuel tank capacity25.0 liters (6.6 US gal.; 5.5 Imp. gal)
Cabin typeTwo-post ROPS
Engine modelIseki
Engine typeFour-stroke, liquid-cooled, inline
Fuel typeDiesel
Displacement1.1 L, 1,123 cm2, (68.5 cu·in)
Bore and stroke
Horsepower24.9 PS (18.3 KW; 24.5 HP) at 3,000 rpm
Transmission and chassis
Chassis4×4 MFWD 4WD
Steering typeHydrostatic power
BrakesWet disc type
Transmission model
Transmission typeHydrostatic
GearsInfinite (2-range) forward and reverse
Speed Forward: 14.6 kmh (9.1 mph)
Front tiresAg: 18×8.50-10
Rear tiresAg: 26×12.00-12
Three-Point Hitch
Control type
Lift capacity (at ends)540 kg (1,190 lbs)
PTO (Power take-off shaft)
Middle PTO typeIndependent
Middle PTO speed2,000 rpm
Rear PTO typeIndependent
Rear PTO speed540 rpm
Hydraulic system
Hydraulic typeOpen center
SCV pump flow4.8 gpm (18.2 lpm)
Steering flow2.0 gpm (7.6 lpm)
Total flow6.8 gpm (25.7 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.