The Minneapolis-Moline G1355 is a 2WD utility tractor manufactured by Minneapolis-Moline in Charles City, Iowa, USA from 1972 to 1974. The Minneapolis-Moline G1355 is equipped with a 9.6 L (585.0 cu·in) six-cylinder diesel engine and one of two transmissions: transmission with 6 forward and 2 reverse gears or a three-range power shift transmission with 18 forward and 6 reverse gears and dry disc clutch.
The Minneapolis-Moline G1355 utility tractor used the Minneapolis-Moline engine. It is a 9.6 L, 9,586 cm2, (585.0 cu·in) six-cylinder natural aspirated diesel engine with 121.0 mm (4.76 in) of the cylinder bore and 140.0 mm (5.51 in) of the piston stroke. The compression ratio rating is 15.3:1. This engine produced 144 PS (105.9 kW; 142.0 HP) at 2,200 rpm of PTO output power.
The MM G1355 is equipped with hydrostatic power steering, dry disc brakes, open operator station or Cab (optional) and 151.4 liters (40 US gal.; 33.3 Imp. gal) fuel tank.
Minneapolis-Moline G1355 Specifications
| General Specifications | |
| Model | Minneapolis-Moline G1355 |
| Length | – |
| Width | – |
| Height | – |
| Wheel base | 2,820 mm (111 in) |
| Weight (operating) | 7,760 kg (17,108 lbs) |
| Fuel tank capacity | 151.4 liters (40 US gal.; 33.3 Imp. gal) |
| Battery | – |
| Cabin type | Open operator station or Cab (optional) |
| Engine | |
| Engine model | Minneapolis-Moline |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Diesel |
| Displacement | 9.6 L, 9,586 cm2, (585.0 cu·in) |
| Bore and stroke | 121.0 mm X 140.0 mm (4.76 in X 5.51 in) |
| Compression ratio | 15.3:1 |
| Horsepower | 144 PS (105.9 kW; 142 HP) at 2,200 rpm |
| Starter | Electric |
| Coolant capacity: | 31.2 L (33 US. qt, 27.5 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Hydrostatic power |
| Brakes | Dry disc |
| Transmission model | – |
| Transmission type | – |
| Gears | 6 forward and 2 reverse |
| Transmission model | Hydraul-Shift |
| Transmission type | Three-range power shift with dry disc clutch |
| Gears | 18 forward and 6 reverse |
| Tires | |
| Front tires | Ag: 11.00-16 |
| Rear tires | Ag: 18.4-38 |
| Three-Point Hitch | |
| Category | III/II |
| Control type | – |
| Lift capacity | 2,720 kg (6,000 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 1000 rpm |
| Hydraulic system | |
| Hydraulic type | Closed center |
| Pump flow | 20.0 gpm (75.7 lpm) |
Be the first to comment