New Holland Boomer 40 (2011-2013)

New Holland Boomer 40The New Holland Boomer 40 is a 4WD compact utility tractor from the Boomer series. This tractor was manufactured by New Holland from 2011 to 2013. The New Holland Boomer 40 is equipped with a 2.5 L (153.0 cu·in) four-cylinder diesel engine and one of two transmissions: a synchronized shuttle transmission with 16 forward and 16 reverse gears or a hydrostatic transmission with infinite (3-range) forward and reverse gears.

The New Holland Boomer 40 compact utility tractor used the Mitsubishi S4Q2 engine. It is a 2.5 L, 2,507 cm2, (153.0 cu·in) four-cylinder natural aspirated diesel engine with 88.0 mm (3.46 in) of the cylinder bore and 103.0 mm (4.06 in) of the piston stroke. This engine produced 41.6 PS (30.6 kW; 41.0 HP) at 2,600 rpm of output power.

The New Holland Boomer 40 is equipped with hydrostatic power steering, differential mechanical wet disc brakes and two-post foldable ROPS.

New Holland Boomer 40 Specifications

General Specifications
Model New Holland Boomer 40
Length 3,070 mm (120.9 in)
Width 1,620 mm (63.8 in)
Height –
Wheel base 1,750 mm (68.9 in)
Weight (shipping) 1,610 kg (3,549 lbs)
Fuel tank capacity –
Battery 12V, CCA 660A
Cabin type Two-post foldable ROPS
Engine
Engine model Mitsubishi S4Q2
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 2.5 L, 2,507 cm2, (153.0 cu·in)
Bore and stroke 88.0 mm X 103.0 mm (3.46 in X 4.06 in)
Horsepower 41.6 PS (30.6 kW; 41.0 HP) at 2,600 rpm
Starter Electric
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Differential mechanical wet disc
Differential lock Mechanical foot-activated
Transmission model –
Transmission type Synchronized shuttle
Gears 16 forward and 16 reverse
Transmission model –
Transmission type Hydrostatic
Gears Infinite (3-range) forward and reverse
Tires
Front tires Ag: –
Rear tires Ag: –
Three-Point Hitch
Category I
Control type –
Lift capacity (at ends) 1,250 kg (2,756 lbs)
PTO (Power take-off shaft)
Middle PTO type Independent (optional)
Middle PTO speed 2,000 rpm
Rear PTO type Independent with electro-hydraulic clutch
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Valves 0 to 2
Pump flow
Steering flow Gear: 4.1 gpm (15.5 lpm)
Hydro: 5.5 gpm (20.8 lpm)
Total flow Gear: 12.3 gpm (46.6 lpm)
Hydro: 13.7 gpm (51.9 lpm)

Be the first to comment

Leave a Reply

Your email address will not be published.


*