New Holland T1510

New Holland T1510The New Holland T1510 is a 2WD or 4WD compact utility tractor from the T1500 series. This tractor was manufactured by New Holland from 2008 to 2013. The New Holland T1510 is equipped with a 1.5 L (91.3 cu·in) three-cylinder diesel engine and one of two transmissions: a hydrostatic transmission with infinite (3-range) forward and reverse gears or a gear type transmission with 9 forward and 3 reverse gears.

The New Holland T1510 compact utility tractor used the Shibaura N843 engine. It is a 1.5 L, 1,496 cm2, (91.3 cu·in) three-cylinder natural aspirated diesel engine with 84.0 mm (3.31 in) of the cylinder bore and 90.0 mm (3.54 in) of the piston stroke. This engine produced 30.5 PS (22.4 kW; 30.0 HP) at 2,600 rpm of output power.

The New Holland T1510 is equipped with hydrostatic power steering, wet disc type brakes, two-post foldable ROPS, and 27.0 liters (7.1 US gal.; 5.9 Imp. gal) fuel tank. This compact utility tractor could be equipped with the New Holland 110TL loader.

New Holland T1510 Specifications

General Specifications
Model New Holland T1510
Length 2,820 mm (111 in)
Width 1,570 mm (61.8 in)
Height 2,090 mm (82.3 in)
Wheel base 1,600 mm (63.0 in)
Ground clearance 330 mm (13 in)
Weight 1,080 kg (2,380 lbs)
Fuel tank capacity 27.0 liters (7.1 US gal.; 5.9 Imp. gal)
Battery 12V, CCA: 420A
Cabin type Two-post foldable ROPS
Engine
Engine model Shibaura N843
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.5 L, 1,496 cm2, (91.3 cu·in)
Bore and stroke 84.0 mm X 90.0 mm (3.31 in X 3.54 in)
Horsepower 30.5 PS (22.4 kW; 30.0 HP) at 2,600 rpm
Starter Electric
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Wet disc type
Transmission model
Transmission type Hydrostatic
Gears Infinite (3-range) forward and reverse
Speed Forward: 23.3 kmh (14.5 mph) Reverse: (0 mph)
Transmission model
Transmission type Gear type
Gears 9 forward and 3 reverse
Tires
Front tires Ag: 7.4×14
Rear tires Ag: 11.2×24
Three-Point Hitch
Caterogy I
Control type
Lift capacity (at ends) 875 kg (1,930 lbs)
PTO (Power take-off shaft)
Middle PTO type Live (2WD) or transmission (4WD)
Middle PTO speed 2,000 rpm
Rear PTO type Live (2WD) or transmission (4WD)
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Pump flow 6.2 gpm (23.5 lpm)
Steering flow 3.8 gpm (14.4 lpm)
Total flow 10.0 gpm (37.9 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*