The New Holland T4.75 is a 2WD or 4WD utility tractor from the T4 PowerStar series. This tractor was manufactured by New Holland from 2012 to 2020. This first generation was manufactured from 2012 to 2014. The New Holland T4.75 is equipped with a 3.2 L (195.0 cu·in) four-cylinder diesel engine and one of three transmissions: a partially synchronized mechanical shuttle transmission with 8 forward and 8 reverse gears, a power shuttle transmission with 8 forward and 8 reverse gears or a mechanical shuttle transmission with 12 forward and 12 reverse gears.
The New Holland T4.75 utility tractor used the FPT F5C engine. It is a 3.2 L, 3,195 cm2, (195.0 cu·in) four-cylinder turbocharged diesel engine with 99.0 mm (3.9 in) of the cylinder bore and 104.0 mm (4.09 in) of the piston stroke. This engine produced 75.1 PS (55.2 kW; 74.0 HP) at 2,300 rpm of output power.
The New Holland T4-75 is equipped with hydrostatic power steering, hydraulic wet disc brakes, two-post foldable ROPS or Cab (optional), and 90.1 liters (23.8 US gal.; 19.8 Imp. gal) fuel tank. This tractor could be equipped with the New Holland 655TL loader.
New Holland T4.75 Specifications
| General Specifications | |
| Model | New Holland T4-75 |
| Length | 3,790 mm (149.2 in) |
| Width | – |
| Height |
ROPS: 2,000 mm (78.7 in) Cab: 2,480 mm (97.6 in) |
| Wheelbase |
2WD: 2,110 mm (83.1 in) 4WD: 2,100 mm (82.7 in) |
| Weight |
2WD ROPS: 2,250 kg (4,960 lbs) 4WD ROPS: 2,670 kg (5,885 lbs) 2WD Cab: 2,520 kg (5,555 lbs) 4WD Cab: 2,800 kg (6,170 lbs) |
| Fuel tank capacity | 90.1 liters (23.8 US gal.; 19.8 Imp. gal) |
| Battery | 12V, CCA 730A (ROPS), 800A (Cab) |
| Cabin type | Two-post foldable ROPS or Cab (optional) |
| Engine | |
| Engine model | FPT F5C |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 3.2 L, 3,195 cm2, (195.0 cu·in) |
| Bore and stroke | 99.0 mm X 104.0 mm (3.9 in X 4.09 in) |
| Horsepower | 75.1 PS (55.2 kW; 74.0 HP) at 2,300 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Hydrostatic power |
| Brakes | Hydraulic wet disc |
| Differential lock | Mechanical differential lock |
| Transmission model | – |
| Transmission type | Partially synchronized mechanical shuttle |
| Gears | 8 forward and 8 reverse |
| Speed | Forward: 32.3 kmh (20.1 mph) Reverse: kmh (0 mph) |
| Transmission model | – |
| Transmission type | Power shuttle |
| Gears | 8 forward and 8 reverse |
| Transmission model | – |
| Transmission type | Mechanical shuttle |
| Gears | 12 forward and 12 reverse |
| Tires | |
| Front tires | Ag: – |
| Rear tires | Ag: – |
| Three-Point Hitch | |
| Category | II/I |
| Control type | Mechanical upper-link draft sensing |
| Lift capacity (at 610 mm / 24 in) | 1,660 kg (3,660 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 540 or 540/540E rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Valves |
Rear: 1 or 2 Middle: 0 or 2 |
| Pump flow | 12.5 gpm (47.3 lpm) |
| Steering flow |
7.3 gpm (27.6 lpm) With power shuttle: 9.5 gpm (36.0 lpm) |
| Total flow | 19.8 gpm (75.0 lpm) |
Be the first to comment