New Holland TC45

New Holland TC45The New Holland TC45 is a 2WD or 4WD compact utility tractor from the Boomer TC series. This tractor was manufactured by New Holland from 2001 to 2003. The New Holland TC45 is equipped with a 2.2 L (135.2 cu·in) four-cylinder diesel engine and one of two transmissions: a synch shuttle transmission with 12 forward and 12 reverse gears or a hydrostatic transmission with infinite (2-range) forward and reverse gears.

The New Holland TC45 compact utility tractor used the Shibaura N844L engine. It is a 2.2 L, 2,215 cm2, (135.2 cu·in) four-cylinder natural aspirated diesel engine with 84.0 mm (3.31 in) of the cylinder bore and 100.0 mm (3.94 in) of the piston stroke. This engine produced 45.7 PS (33.6 kW; 45.1 HP) at 2,600 rpm of output power.

The New Holland TC45 is equipped with hydrostatic power steering, two-post ROPS or Cab (optional) and 49.2 liters (13 US gal.; 10.8 Imp. gal) fuel tank.

Following attachments are available for the New Holland TC45 compact utility tractor:

  • New Holland 16LA loader
  • New Holland 17LA loader

New Holland TC45 variants:

  • TC45: base model
  • TC45D: deluxe

New Holland TC45 Specifications

General Specifications
ModelNew Holland TC45
Length3,180 mm (125.2 in)
SuperSteer: 3,290 mm (129.5 in)
Width1,550 mm (61 in)
Height (ROPS)2,410 mm (94.9 in)
Wheel base1,860 mm (73.2 in)
SuperSteer: 2,050 mm (80.7 in)
Ground clearance350 mm (13.8 in)
Weight (shipping) TC45 2WD: 1,450 kg (3,197 lbs)
TC45 4WD: 1,520 kg (3,351 lbs)
TC45D 4WD: 1,550 kg (3,415 lbs)
TC45D SuperSteer: 1,625 kg (3,585 lbs)
Fuel tank capacity49.2 liters (13 US gal.; 10.8 Imp. gal)
Cabin typeTwo-post ROPS or Cab (optional)
Engine modelShibaura N844L
Engine typeFour-stroke, liquid-cooled, inline
Fuel typeDiesel
Displacement2.2 L, 2,215 cm2, (135.2 cu·in)
Bore and stroke84.0 mm X 100.0 mm (3.31 in X 3.94 in)
Horsepower45.7 PS (33.6 kW; 45.1 HP) at 2,600 rpm
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD
Steering typeHydrostatic power
Transmission model
Transmission typeSynch shuttle
Gears12 forward and 12 reverse
Transmission model
Transmission typeHydrostatic
GearsInfinite (2-range) forward and reverse
Front tires Ag: 5.50×16 or 7.5Lx15 (2WD); 7×16 or 8×16 (4WD)
Rear tires Ag: 13.6×24, 14.9×24
Three-Point Hitch
Control type
Lift capacity (at 610 mm/24 in)1056 kg (2328 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO speed540 rpm
Hydraulic system
Hydraulic type
Pump flow9.8 gpm (37.1 lpm)
Steering flow5.1 gpm (19.3 lpm)
Total flow14.9 gpm (56.4 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.