John Deere 5065E (2015-)

John Deere 5065E (2015-)The John Deere 5065E is a 2WD or 4WD utility tractor from the 5E series. This third generation has been manufactured by John Deere in Pune, Maharashtra, India from 2015. The John Deere 5065E is equipped with a 2.9 L (179.0 cu·in) three-cylinder diesel engine and one of two transmissions: a partially synchronized transmission with 9 forward and 3 reverse gears or a partially synchronized power shuttle transmission with 12 forward and 12 reverse gears.

The John Deere 5065E utility tractor used the John Deere PowerTech 3029 engine. It is a 2.9 L, 2,933 cm2, (179.0 cu·in) three-cylinder turbocharged diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 16.9:1. This engine produced 68.0 PS (50.0 kW; 67.1 HP) at 2,100 rpm of output power.

The John Deere 5065E is equipped with power steering, hydraulic wet disc brakes, two-post foldable ROPS or Cab (optional), and 68.1 liters (18 US gal.; 15 Imp. gal) fuel tank for ROPS version or 82.1 liters (21.7 US gal, 18.1 Imp. gal) for Cab version.

John Deere 5065E Specifications

General Specifications
Model John Deere 5065E
Length 3,500 mm (137.8 in)
Width 1,450 mm (57.1 in)
Height ROPS: 2,520 mm (99.2 in)
Cab: 2,410 mm (94.9 in)
Wheel base 2,040 mm (80.3 in)
Ground clearance (front axle) 2WD: 470 mm (18.5 in)
4WD: 340 mm (13.4 in)
Weight 2WD ROPS: 2,100 kg (4,630 lbs)
4WD ROPS: 2,550 kg (5,622 lbs)
Fuel tank capacity ROPS: 68.1 liters (18 US gal.; 15 Imp. gal)
Cab: 82.1 liters (21.7 US gal, 18.1 Imp. gal)
Battery ROPS: 12V, CCA 623A, 80Ah
Cab: 12V, CCA 925A, 95Ah
Cabin type Two-post foldable ROPS or Cab (optional)
Engine
Engine model John Deere PowerTech 3029
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 2.9 L, 2,933 cm2, (179.0 cu·in)
Bore and stroke 106.0 mm X 110.0 mm (4.17 in X 4.33 in)
Compression ratio 16.9:1
Horsepower 68.0 PS (50.0 kW; 67.0 HP) at 2,100 rpm
Starter Electric
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Hydraulic wet disc
Transmission model Top-Shaft Synchronized (TSS)
Transmission type Partially synchronized with dry disc clutch
Gears 9 forward and 3 reverse
Speed Forward: 27.9 kmh (17.3 mph) Reverse: 22.1 kmh (13.7 mph)
Transmission model PowrReverser
Transmission type Partially synchronized power shuttle
Gears 12 forward and 12 reverse
Speed Forward: 31.8 kmh (19.8 mph)
Tires
Front tires Ag: 5-16 (2WD), 9.5-24 (4WD)
Rear tires Ag: 16.9-28
Three-Point Hitch
Category II
Control type Position and top-link draft control
Lift capacity (at ends) 1,800 kg (3,970 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Valves 1 or 2
Pump flow 11.4 gpm (43.2 lpm)
Steering flow 6.8 gpm (25.7 lpm)
Total flow 18.2 gpm (68.9 lpm)