Yanmar 424

Yanmar 424The Yanmar 424 is a 4WD sub-compact utility tractor manufactured by Yanmar since 2014. The Yanmar 424 is equipped with a 1.3 L (77.2 cu·in) three-cylinder diesel engine and a hydrostatic transmission with infinite (2-range) forward and reverse gears.

The Yanmar 424 sub-compact utility tractor used the Yanmar 3TNV80F engine. It is a 1.3 L, 1,265 cm2, (77.2 cu·in) three-cylinder natural aspirated diesel engine with 80.0 mm (3.15 in) of the cylinder bore and 84.0 mm (3.31 in) of the piston stroke. This engine produced 24.2 PS (17.8 kW; 23.9 HP) at 3,200 rpm of output power.

The Yanmar 424 is equipped with hydrostatic power steering, wet disc brakes, two-post foldable ROPS, and 22.7 liters (6 US gal.; 5 Imp. gal) fuel tank.

Following attachments are available for the Yanmar 424 sub-compact utility tractor:

  • Mid-mount Yanmar 1,520 mm (60 in) mower deck
  • Yanmar YL110 loader

Yanmar 424 Specifications

General Specifications
ModelYanmar 424
Length2,680 mm (105.5 in)
Width1,380 mm (54.3 in)
Height2,180 mm (85.8 in)
Wheel base1,600 mm (63 in)
Ground clearance210 mm (8.3 in)
Weight830 kg (1,830 lbs)
Fuel tank capacity22.7 liters (6 US gal.; 5 Imp. gal)
Battery12V, CCA 540A
Cabin typeTwo-post foldable ROPS
Engine
Engine modelYanmar 3TNV80F
Engine typeFour-stroke, liquid-cooled, inline
Cylinders3
Fuel typeDiesel
Displacement1.3 L, 1,265 cm2, (77.2 cu·in)
Bore and stroke80.0 mm X 84.0 mm (3.15 in X 3.31 in)
Horsepower24.2 PS (17.8 kW; 23.9 HP) at 3,200 rpm
Torque62.0 N·m (6.3 kg·m, 45.7 ft·lb) at rpm
StarterElectric
Oil capacity:3.4 L (3.6 US. qt, 3 Imp. qt.)
Coolant capacity:2.8 L (3 US. qt, 2.5 Imp. qt.)
Transmission and chassis
Chassis4×4 MFWD 4WD
Steering typeHydrostatic power
BrakesWet disc
Transmission model
Transmission typeHydrostatic
GearsInfinite (2-range) forward and reverse
Speed Forward: 21.1 kmh (13.1 mph) Reverse: 21.1 (13.1 mph)
Transmission oil capacity15.5 L (4.1 US. gal, 3.4 Imp. gal.)
Tires
Front tiresLawn/turf: 24×8.50-14
Rear tiresLawn/turf: 36×14.00-15
Three-Point Hitch
CaterogyI Limited
Control typePosition control
Lift capacity (at 610 mm / 24 in)550 kg (1,215 lbs)
PTO (Power take-off shaft)
Middle PTO typeIndependent
Middle PTO speed2,000 rpm
Rear PTO typeIndependent with hydraulic clutch
Rear PTO speed540 rpm
Hydraulic system
Hydraulic typeOpen center
Pressure2430 psi (167.5 bar)
Pump flow4.3 gpm (16.3 lpm)
Steering flow3.7 gpm (14 lpm)
Total flow8.0 gpm (30.3 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*