The John Deere 6330 is a 2WD or 4WD utility tractor from the 6030 series. This tractor was manufactured by John Deere in Mannheim, Baden-Württemberg, Germany from 2007 to 2012. The John Deere 6330 is equipped with a 4.5 L (276.0 cu·in) four-cylinder diesel engine and four variants of the transmission.
The JD 6330 utility tractor used the John Deere 4045HL PowerTech E engine. It is a 4.5 L, 4,523 cm2, (276.0 cu·in) four-cylinder turbocharged diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 19.0:1. This engine produced 106.5 PS (78.3 kW; 105.0 HP) at 2,300 rpm of output power and 424.4 N·m (43.3 kg·m, 312.8 ft·lb) at 1,500 rpm.
The John Deere 6330 is equipped with hydrostatic power steering, hydraulic wet disc brakes, two-post ROPS or cab (optional), and 165.0 liters (43.6 US gal.; 36.3 Imp. gal) fuel tank.
John Deere 6330 Specifications
| General Specifications | |
| Model | John Deere 6330 |
| Length | – |
| Width | – |
| Height | – |
| Wheel base | 2,400 mm (94.5 in) |
| Ground clearance | 460 mm (18.1 in) |
| Weight | 4,536 kg (10,000 lbs) |
| Fuel tank capacity |
Standard: 165.0 liters (43.6 US gal.; 36.3 Imp. gal) Optional: 182.0 liters (48.0 US gal.; 40.0 Imp. gal) |
| Battery | 12V |
| Cabin type | Two-post ROPS or Cab (optional) |
| Engine | |
| Engine model |
2007-2009: John Deere 4045HL281 PowerTech E 2010-2012: John Deere 4045HL288 PowerTech E |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 4.5 L, 4,523 cm2, (276.0 cu·in) |
| Bore and stroke | 106.0 mm X 127.0 mm (4.17 in X 5 in) |
| Compression ratio | 19.0:1 |
| Horsepower (net) | 106.5 PS (78.3 kW; 105.0 HP) at 2,300 rpm |
| Torque | 424.4 N·m (43.3 kg·m, 312.8 ft·lb) at 1,500 rpm |
| Starter | Electric |
| Oil capacity: | 15.9 L (16.8 US. qt, 14 Imp. qt.) |
| Coolant capacity: |
ROPS: 26.5 L (28.0 US. qt, 23.3 Imp. qt.) Cab: 29.1 L (30.7 US. qt, 25.6 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD (optional) |
| Steering type | Hydrostatic power |
| Brakes | Hydraulic wet disc |
| Transmission model | John Deere SyncroPlus |
| Transmission type | Fully synchronized |
| Gears | 12 forward and 4 reverse |
| Speed | Forward: 30.7 kmh (19.1 mph) Reverse: 21.2 kmh (13.2 mph) |
| Transmission oil capacity | 51.9 L (13.7 US. gal, 11.4 Imp. gal.) |
| Transmission model | John Deere PowrReverser |
| Transmission type | Synchronized with power shuttle |
| Gears | 16 forward and 16 reverse |
| Speed | Forward: 30.7 kmh (19.1 mph) Reverse: 32.0 kmh (19.9 mph) |
| Transmission oil capacity | 51.9 L (13.7 US. gal, 11.4 Imp. gal.) |
| Transmission model | John Deere PowrQuad |
| Transmission type | Partial power shift |
| Gears | 16 forward and 16 reverse |
| Speed | Forward: 30.7 kmh (19.1 mph) Reverse: 32.0 kmh (19.9 mph) |
| Transmission oil capacity |
PowrQuad: 48.8 L (12.9 US. gal, 10.7 Imp. gal.) PowrQuad Plus: 50.0 L (13.2 US. gal, 11.0 Imp. gal.) |
| Transmission model | John Deere PowrQuad |
| Transmission type | Partial power shift |
| Gears | 24 forward and 24 reverse |
| Speed | Forward: 40.2 kmh (25.0 mph) |
| Transmission oil capacity | 50.0 L (13.2 US. gal, 11.0 Imp. gal.) |
| Tires | |
| Front tires | Ag: – |
| Rear tires | Ag: – |
| Three-Point Hitch | |
| Category | III/II |
| Control type | – |
| Lift capacity (at ends) | 2,020 kg (4,450 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 540, 540/1000 rpm |
| Hydraulic system | |
| Hydraulic type | open-center load sensing or closed-center pressure-flow compensated (optional) |
| Hydraulic capacity | 51.9 L (13.7 US. gal, 11.4 Imp. gal.) |
| Pressure | 2900 psi (199.9 bar) |
| Valves | 1 to 3 |
| Total flow |
21.1 gpm (79.9 lpm) Optional: 29.0 gpm (109.8 lpm) |
Be the first to comment