The CaseIH 8950 Magnum is a 4WD row-crop tractor from the Magnum 8900 series. This tractor was manufactured by CaseIH in Racine, Wisconsin, USA from 1997 to 1998. The CaseIH 8950 is equipped with a 8.3 L (504.5 cu·in) six-cylinder diesel engine and a full power shift transmission with 18 forward and 4 reverse gears (24 forward and 6 reverse with creeper).
The CaseIH 8950 row-crop tractor used the CDC engine. It is a 8.3 L, 8,267 cm2, (504.5 cu·in) six-cylinder turbocharged intercooled diesel engine with 114.0 mm (4.49 in) of the cylinder bore and 135.0 mm (5.31 in) of the piston stroke. The compression ratio rating is 16.5:1. This engine produced 228.2 PS (167.8 kW; 225.0 HP) at 2,200 rpm of PTO output power.
The CaseIH 8950 is equipped with power steering, differential hydraulic wet disc brakes, cab (standard), and 442.8 liters (117 US gal.; 97.4 Imp. gal) fuel tank.
CaseIH 8950 Specifications
| General Specifications | |
| Model | CaseIH 8950 |
| Length | – |
| Width | – |
| Height | – |
| Wheel base | 3,000 mm (118.1 in) |
| Ground clearance | 490 mm (19.3 in) |
| Weight (shipping) | 7,915 kg (17,450 lbs) |
| Fuel tank capacity |
Standard: 442.8 liters (117 US gal.; 97.4 Imp. gal) Optional: 393.6 liters (104 US gal, 86.6 Imp. gal) |
| Battery | Two 12V, CCA 950A |
| Cabin type | Cab (standard) with air-conditioning. |
| Engine | |
| Engine model | CDC |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Diesel |
| Displacement | 8.3 L, 8,267 cm2, (504.5 cu·in) |
| Bore and stroke | 114.0 mm X 135.0 mm (4.49 in X 5.31 in) |
| Compression ratio | 16.5:1 |
| Horsepower (PTO) | 228.2 PS (167.8 kW; 225.0. HP) at 2,200 rpm |
| Starter | Electric |
| Oil capacity: | 20.8 L (22 US. qt, 18.3 Imp. qt.) |
| Coolant capacity: | 29.3 L (31 US. qt, 25.8 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Differential hydraulic wet disc |
| Differential lock | Electric rear |
| Transmission model | – |
| Transmission type | Full power shift with hydraulic wet disc clutch |
| Gears | 18 forward and 4 reverse |
| Speed | Forward: 32.8 kmh (20.4 mph) Reverse: 11.9 kmh (7.4 mph) |
| Tires | |
| Front tires | Ag: 16.9R-30 |
| Rear tires | Ag: 18.4R-46 |
| Three-Point Hitch | |
| Category | III/IIIN |
| Control type | Electronic lower-link draft sensing |
| Lift capacity (at ends) | 7,260 kg (16,000 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent with electro-hydraulic wet disc clutch |
| Rear PTO speed | 1,000 rpm |
| Hydraulic system | |
| Hydraulic type | Closed center pressure-flow compensated |
| Hydraulic capacity | 172.2 L (45.5 US. gal, 37.9 Imp. gal.) |
| Pressure | 2200 psi (151.7 bar) |
| Valves | 3 or 4 |
| Pump flow | 29.0 gpm (109.8 lpm) |
| SCV flow | 27.0 gpm (102.2 lpm) |
Be the first to comment