CaseIH 8950

CaseIH 8950The CaseIH 8950 Magnum is a 4WD row-crop tractor from the Magnum 8900 series. This tractor was manufactured by CaseIH in Racine, Wisconsin, USA from 1997 to 1998. The CaseIH 8950 is equipped with a 8.3 L (504.5 cu·in) six-cylinder diesel engine and a full power shift transmission with 18 forward and 4 reverse gears (24 forward and 6 reverse with creeper).

The CaseIH 8950 row-crop tractor used the CDC engine. It is a 8.3 L, 8,267 cm2, (504.5 cu·in) six-cylinder turbocharged intercooled diesel engine with 114.0 mm (4.49 in) of the cylinder bore and 135.0 mm (5.31 in) of the piston stroke. The compression ratio rating is 16.5:1. This engine produced 228.2 PS (167.8 kW; 225.0 HP) at 2,200 rpm of PTO output power.

The CaseIH 8950 is equipped with power steering, differential hydraulic wet disc brakes, cab (standard), and 442.8 liters (117 US gal.; 97.4 Imp. gal) fuel tank.

CaseIH 8950 Specifications

General Specifications
Model CaseIH 8950
Length
Width
Height
Wheel base 3,000 mm (118.1 in)
Ground clearance 490 mm (19.3 in)
Weight (shipping) 7,915 kg (17,450 lbs)
Fuel tank capacity Standard: 442.8 liters (117 US gal.; 97.4 Imp. gal)
Optional: 393.6 liters (104 US gal, 86.6 Imp. gal)
Battery Two 12V, CCA 950A
Cabin type Cab (standard) with air-conditioning.
Engine
Engine model CDC
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 8.3 L, 8,267 cm2, (504.5 cu·in)
Bore and stroke 114.0 mm X 135.0 mm (4.49 in X 5.31 in)
Compression ratio 16.5:1
Horsepower (PTO) 228.2 PS (167.8 kW; 225.0. HP) at 2,200 rpm
Starter Electric
Oil capacity: 20.8 L (22 US. qt, 18.3 Imp. qt.)
Coolant capacity: 29.3 L (31 US. qt, 25.8 Imp. qt.)
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Power
Brakes Differential hydraulic wet disc
Differential lock Electric rear
Transmission model
Transmission type Full power shift with hydraulic wet disc clutch
Gears 18 forward and 4 reverse
Speed Forward: 32.8 kmh (20.4 mph) Reverse: 11.9 kmh (7.4 mph)
Tires
Front tires Ag: 16.9R-30
Rear tires Ag: 18.4R-46
Three-Point Hitch
Category III/IIIN
Control type Electronic lower-link draft sensing
Lift capacity (at ends) 7,260 kg (16,000 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent with electro-hydraulic wet disc clutch
Rear PTO speed 1,000 rpm
Hydraulic system
Hydraulic type Closed center pressure-flow compensated
Hydraulic capacity 172.2 L (45.5 US. gal, 37.9 Imp. gal.)
Pressure 2200 psi (151.7 bar)
Valves 3 or 4
Pump flow 29.0 gpm (109.8 lpm)
SCV flow 27.0 gpm (102.2 lpm)