The Husqvarna YTH24V54 is a 2WD lawn tractor manufactured by Husqvarna during 2010. The Husqvarna YTH24V54 is equipped with a 0.7 L (44.2 cu·in) two-cylinder gasoline engine and a belt-driven hydrostatic transmission with infinite forward and reverse gears.
The Husqvarna YTH24V54 lawn tractor used the Briggs & Stratton Intek engine. It is a 0.7 L, 724 cm2, (44.2 cu·in) two-cylinder natural aspirated gasoline engine with 79.2 mm (3.12 in) of the cylinder bore and 73.4 mm (2.89 in) of the piston stroke. This engine produced 24.3 PS (17.9 kW; 24.0 HP) at 3,600 rpm of output power.
The Husqvarna YTH24V54 is equipped with manual steering, an open operator station, and 11.4 liters (3 US gal.; 2.5 Imp. gal) fuel tank.
Husqvarna YTH24V54 Specifications
| General Specifications | |
| Model | Husqvarna YTH24V54 |
| Length | – |
| Width | – |
| Height | – |
| Wheel base | – |
| Weight | – |
| Fuel tank capacity | 11.4 liters (3 US gal.; 2.5 Imp. gal) |
| Battery | 12V |
| Cabin type | Open operator station |
| Engine | |
| Engine model | Briggs & Stratton Intek |
| Engine type | Four-stroke, air-cooled, V |
| Cylinders | 2 |
| Fuel type | Gasoline |
| Displacement | 0.7 L, 724 cm2, (44.2 cu·in) |
| Bore and stroke | 79.2 mm X 73.4 mm (3.12 in X 2.89 in) |
| Horsepower | 24.3 PS (17.9 kW; 24 HP) at 3,600 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Manual |
| Brakes | – |
| Transmission model | – |
| Transmission type | Belt-driven hydrostatic |
| Gears | Infinite forward and reverse |
| Tires | |
| Front tires | Ag: 15×6-6 |
| Rear tires | Ag: 20×8-8 |
| PTO (Power take-off shaft) | |
| Front PTO type | Independent with electric clutch |
| Front PTO speed | – |
Be the first to comment