Husqvarna YTH24V54

Husqvarna YTH24V54The Husqvarna YTH24V54 is a 2WD lawn tractor manufactured by Husqvarna during 2010. The Husqvarna YTH24V54 is equipped with a 0.7 L (44.2 cu·in) two-cylinder gasoline engine and a belt-driven hydrostatic transmission with infinite forward and reverse gears.

The Husqvarna YTH24V54 lawn tractor used the Briggs & Stratton Intek engine. It is a 0.7 L, 724 cm2, (44.2 cu·in) two-cylinder natural aspirated gasoline engine with 79.2 mm (3.12 in) of the cylinder bore and 73.4 mm (2.89 in) of the piston stroke. This engine produced 24.3 PS (17.9 kW; 24.0 HP) at 3,600 rpm of output power.

The Husqvarna YTH24V54 is equipped with manual steering, an open operator station, and 11.4 liters (3 US gal.; 2.5 Imp. gal) fuel tank.

Husqvarna YTH24V54 Specifications

General Specifications
Model Husqvarna YTH24V54
Length
Width
Height
Wheel base
Weight
Fuel tank capacity 11.4 liters (3 US gal.; 2.5 Imp. gal)
Battery 12V
Cabin type Open operator station
Engine
Engine model Briggs & Stratton Intek
Engine type Four-stroke, air-cooled, V
Cylinders 2
Fuel type Gasoline
Displacement 0.7 L, 724 cm2, (44.2 cu·in)
Bore and stroke 79.2 mm X 73.4 mm (3.12 in X 2.89 in)
Horsepower 24.3 PS (17.9 kW; 24 HP) at 3,600 rpm
Starter Electric
Transmission and chassis
Chassis 4×2 2WD
Steering type Manual
Brakes
Transmission model
Transmission type Belt-driven hydrostatic
Gears Infinite forward and reverse
Tires
Front tires Ag: 15×6-6
Rear tires Ag: 20×8-8
PTO (Power take-off shaft)
Front PTO type Independent with electric clutch
Front PTO speed