The Ford 5030 is a 2WD or 4WD utility tractor manufactured by Ford from 1992 to 1999. The Ford 5030 is equipped with a 4.2 L (255.0 cu·in) four-cylinder diesel engine and one of two transmissions: a partial power shift transmission with 16 forward and 8 reverse gears or transmission with 8 forward and 8 reverse gears.
The Ford 5030 utility tractor used the Ford engine. It is a 4.2 L, 4,178 cm2, (255.0 cu·in) four-cylinder natural aspirated diesel engine with 112.0 mm (4.41 in) of the cylinder bore and 107.0 mm (4.21 in) of the piston stroke. The compression ratio rating is 16.3:1. This engine produced 62.8 PS (46.2 kW; 62.0 HP) at 2,200 rpm of PTO output power.
The Ford 5030 is equipped with hydrostatic power steering, differential wet disc brakes, two-post ROPS or Cab (optional), and 65.5 liters (17.3 US gal.; 14.4 Imp. gal) fuel tank.
Ford 5030 Specifications
| General Specifications | |
| Model | Ford 5030 |
| Length | – |
| Width | – |
| Height | – |
| Wheel base | 2,270 mm (89.4 in) |
| Weight (operating) | 4WD ROPS: 2,715 kg (5,986 lbs) |
| Fuel tank capacity | 65.5 liters (17.3 US gal.; 14.4 Imp. gal) |
| Battery | – |
| Cabin type | Two-post ROPS or Cab (optional) |
| Engine | |
| Engine model | Ford |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 4.2 L, 4,178 cm2, (255.0 cu·in) |
| Bore and stroke | 112.0 mm X 107.0 mm (4.41 in X 4.21 in) |
| Compression ratio | 16.3:1 |
| Horsepower PTO | 62.8 PS (46.2 kW; 62.0 HP) at 2,200 rpm |
| Starter | Electric |
| Coolant capacity: | 12.5 L (13.2 US. qt, 11 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD (optional) |
| Steering type | Hydrostatic power |
| Brakes | Differential wet disc |
| Transmission model | – |
| Transmission type | Partial power shift |
| Gears | 16 forward and 8 reverse |
| Transmission model | – |
| Transmission type | – |
| Gears | 8 forward and 8 reverse |
| Tires | |
| Front tires | Ag: 7.50-15 |
| Rear tires | Ag: 13.6-28 |
| Three-Point Hitch | |
| Category | I |
| Control type | – |
| Lift capacity (at ends) | 1,395 kg (3,075 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Transmission |
| Rear PTO speed | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Hydraulic capacity | 48.1 L (12.7 US. gal, 10.6 Imp. gal.) |
| Pump flow | 8.0 gpm (30.3 lpm) |
Be the first to comment