Branson 2400 (2007-) tractor specifications: engine and transmission, dimensions and weight, fluid capacity and service data, tyres size, attachments
The Branson 2400 is a 2WD/4WD compact utility tractor, manufactured by South Korean company Kukje Machinery Company on the factory in Yangsu-ri, South Korea since 2007. This tractor is equipped with three-cylinders Kukje A1100N2 diesel engine the displacement of which is 1.2 L (1,175 cc, 71.7 cu-in) and gear shift transmission with 6 forward and 2 reverse gears.
The Branson 2400 utility tractor used a three-cylinder naturally-aspirated liquid-cooled vertical diesel engine Kukje A1100N2 with 1,175 cc (71.7 cu-in) of displacement with swirl chambers. The Kukje A1100N2 motor has 78.0 mm (3.07 in) of the cylinder bore and 82.0 mm (3.23 in) of the piston stroke. It produced 24.5 PS (18.0 KW; 24.0 HP) at 2,800 rpm of gorss horsepower and 65.0 Nm (6.6 kg·m; 48.0 lbf·ft) of peak torque. The engine used a dry air cleaner with double filter elements.
The Branson 2400 is equipped with gear shift transmission and dry type, single stage clutch. The transmission has 6 forward and 2 reverse gears. The tractor used hydrostatic power steering, wet disc brakes and open operator station with two-post folding ROPS.
General Specifications
General Specifications
Model
Branson 2400
Tractor type
Сompact utility tractor
Production years
2007-
Manufacturer
Kukje Machinery Company
Factory
Yangsu-ri, South Korea
Dimensions and weight
Length (with 3-pt)
3,055 mm (120.3 in.)
Width (min)
1,124 mm (44.3 in.)
Height (with ROPS)
2,216 mm (87.2 in.)
Wheelbase
1,502 mm (59.1 in.)
Ground clearance
307 mm (12.1 in.)
Weight
819 kg (1,805 lb.)
Fluid capacity
Fuel tank capacity
23.0 liters (6.1 US gal, 5.1 Imp. gal)
Oil capacity
3.0 liters (3.2 US.qts, 2.6 Imp. qts)
Coolant capacity
4.6 liters (4.9 US.qts, 4.0 Imp. qts)
Transmission oil capacity
13.0 liters (13.7 US.qts, 11.4 Imp. qts)
Front axle oil capacity
3.0 liters (3.2 US.qts, 2.6 Imp. qts)
Electrical system
Ground
Negative
Charging system
Alternator
Charging amps
50 A
Battery
12V
Cabin type
Cabin type
Open operator station with two-post folding ROPS (Rollover protection structure)
Engine
Engine
Engine model
Kukje A1100N2
Fuel
Diesel
Emissions standard
Tier 4
Displacement
1.2 L, 1,175 cc (71.7 cu.in.)
Bore x stroke
78.0 x 82.0 mm (3.07 x 3.23 in)
Power output
Gross: 24.5 PS (18.0 KW; 24.0 HP) at 2,800 rpm At PTO-shaft: 21.4 PS (15.7 KW; 21.0 HP) at 2,8600 rpm
Torque
65.0 Nm (6.6 kg·m; 48.0 lbf·ft)
Starter type
Electric starter
Oil type
10W-40
Oil capacity
3.0 liters (3.17 US.qts, 2.64 Imp. qts))
Coolant capacity
4.6 liters (4.9 US.qts, 4.0 Imp. qts)
Transmission and chassis
Transmission and chassis
Chassis
2WD/4WD
Steering
Hydrostatic power type
Brake
Wet, multi-disc
Differential Lock
Standard
Transmission type
Sliding mesh with dry single plate clutch
Gears
6 forward and 2 reverse
Ground speed
Forward: 0.9-16.0 km/h (0.6-9.94 mph) Reverse: 1.2-6.3 km/h (0.75-3.9 mph)
Transmission oil capacity
11.0 liters (11.6 US.qts, 9.7 Imp. qts)
Front axle oil capacity
3.0 liters (3.2 US.qts, 2.6 Imp. qts)
Tires
Tires size
Front tires
6-12
Rear tires
9.5-16
PTO and 3-point hitch
PTO (Power take-off shaft)
PTO Type:
Rear, Live type PTO
PTO Speed:
540 / 960 rpm
3-point hitch
3-point linkage:
Category I
Control system:
–
No. of remote valves:
–
Max lifting capacity (at link end):
680 kg (1,499 lbs)
Hydraulic system
Hydraulic system
Type
Dual pump
Pump flow
18.2 lpm (4.8 gpm)
Total flow
31.0 lpm (8.2 gpm)
Steering flow
12.9 lpm (3.4 gpm)
Attachments
Branson SL00 Loader
Height (at pin)
2,220 mm (87.6 in)
Lift (full at pin)
480 kg (1,060 lbs)
Breakout
843 kg (1,840 lbs)
Dump angle
53°
Rollback angle (ground line)
33°
Dump reach
800 mm (31.5 in)
Ground reach
1,490 mm (59.0 in)
Dump clearance
2,130 mm (84.2 in)
Bucket width
1,270 mm (50.0 in)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment