The Kubota B7400 is a 4WD utility tractor from the B series. This tractor was manufactured by the Kubota from 2000 to 2003. The Kubota B7400 is equipped with a 0.7 L three-cylinder diesel engine and hydrostatic transmission with infinite (2-range) forward and reverse gears.
The Kubota B7400 utility tractor used the Kubota D722-E-D16 engine. It is a 0.7 L, 719 cm2, (43.9 cu·in) three-cylinder natural aspirated diesel engine with 67.0 mm (2.64 in) of the cylinder bore and 68.0 mm (2.68 in) of the piston stroke. This engine produced 16.2 PS (11.9 kW; 16.0 HP) at 2,900 rpm of maximum output power. The D722-E-D16 indirect fuel injection system and dual paper element air cleaner.
The Kubota B7400 is equipped with manual steering, wet disc type brakes, open operator station with two-post ROPS (rollover protection structure) and 12.9 liters (3.4 US gal.; 2.8 Imp. gal) fuel tank.
Kubota B7400 Specifications
| General Specifications | |
| Model | Kubota B7400 |
| Length | 2,280 mm (89.8 in) |
| Width | 980 mm (38.6 in) |
| Height | 1,910 mm (75.2 in) |
| Wheel base | 1,490 mm (58.7 in) |
| Weight | 585 kg (1288 lbs) |
| Fuel tank capacity | 12.9 liters (3.4 US gal.; 2.8 Imp. gal) |
| Battery | 12V, CCA: 390A |
| Cabin type | Open operator station with two-post ROPS |
| Engine | |
| Engine model | Kubota D722-E-D16 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 0.7 L, 719 cm2, (43.9 cu·in) |
| Bore and stroke | 67.0 mm X 68.0 mm (2.64 in X 2.68 in) |
| Horsepower | 16.2 PS (11.9 kW; 16.0 HP) at 2,900 rpm |
| Starter | Electric |
| Oil capacity: | 2.4 L (2.54 US. qt, 2.11 Imp. qt.) |
| Coolant capacity: | 2.7 L (2.85 US. qt, 2.38 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Manual |
| Brakes | Wet disc type |
| Transmission model | – |
| Transmission type | Hydrostatic |
| Gears | Infinite (2-range) forward and reverse |
| Transmission oil capacity | 11.2 L (11.83 US. qt, 9.85 Imp. qt.) |
| Tires | |
| Front tires | Ag: 6-12 |
| Rear tires | Ag: 8.3-16 |
| Three-Point Hitch | |
| Caterogy | I |
| Control type | |
| Lift capacity | 615 kg (1356 lbs) |
| PTO (Power take-off shaft) | |
| Middle PTO type | – |
| Middle PTO spped | 2,500 rpm |
| Rear PTO type | Independent |
| Rear PTO spped | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Total flow | 3.9 gpm (14.8 lpm) |
Be the first to comment