The Farmall Super C is a 2WD row-crop tractor manufactured by International Harvester from 1951 to 1954. The Farmall Super C is equipped with a 2.0 L four-cylinder gasoline engine and sliding gear transmission with 4 forward and 1 reverse gear.
The Farmall Super C row-crop tractor used the International Harvester C123 engine. It is a 2.0 L, 2,011 cm2, (122.7 cu·in) four-cylinder natural aspirated gasoline engine with 79.0 mm (3.11 in) of the cylinder bore and 102.0 mm (4.02 in) of the piston stroke. The compression ratio rating is 6.0:1. This engine produced 26.2 PS (19.3 KW; 26.0 HP) of output power.
The Farmall Super C is equipped with manual steering, differential mechanical disc brakes, open operator station and 41.6 liters (11 US gal.; 9.2 Imp. gal) fuel tank.
Farmall Super C Specifications
| General Specifications | |
| Model | Farmall Super C |
| Length | 3,120 mm (122.8 in) |
| Width | – |
| Height | 1,890 mm (74.4 in) |
| Wheel base | 2,080 mm (81.9 in) |
| Weight | 1,405 kg (3,097 lbs) |
| Fuel tank capacity | 41.6 liters (11 US gal.; 9.2 Imp. gal) |
| Battery | 6V |
| Cabin type | Open operator station |
| Engine | |
| Engine model | International Harvester C123 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Gasoline |
| Displacement | 2.0 L, 2,011 cm2, (122.7 cu·in) |
| Bore and stroke | 79.0 mm X 102.0 mm (3.11 in X 4.02 in) |
| Compression ratio | 6.0:1 |
| Horsepower | 26.2 PS (19.3 KW; 25.9 HP) |
| Starter | Electric |
| Oil capacity: | 4.7 L (5 US. qt, 4.1 Imp. qt.) |
| Coolant capacity: | 14.2 L (15 US. qt, 12.5 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Manual |
| Brakes | Differential mechanical disc |
| Transmission model | – |
| Transmission type | Sliding gear |
| Gears | 4 forward and 1 reverse |
| Speed | Forward: 16.6 kmh (10.3 mph) Reverse: 4.8 (3 mph) |
| Tires | |
| Front tires | Ag: 5.00-15 |
| Rear tires | Ag: 10-36 |
| Three-Point Hitch | |
| Caterogy | IH Fast Hitch |
| Control type | – |
| Lift capacity (at ends) | – |
| PTO (Power take-off shaft) | |
| Rear PTO type | – |
| Rear PTO speed | 540 rpm |

Be the first to comment