The Mahindra 6530 is a 2WD or 4WD utility tractor from the 30 series. This tractor was manufactured by Mahindra from 2008 to 2018. The Mahindra 6530 is equipped with a 2.5 L (152.4 cu·in) three-cylinder diesel engine and a synchronized shuttle transmission with cerametallic dry disc clutch and 8 forward and 8 reverse gears.
The Mahindra 6530 utility tractor used the Mahindra engine. It is a 2.5 L, 2,497 cm2, (152.4 cu·in) three-cylinder turbocharged intercooled diesel engine. The compression ratio rating is 17.2:1. This engine produced 66 PS (48.5 kW; 65.0 HP) at 2,200 rpm of output power.
The Mahindra 6530 is equipped with hydrostatic power steering, wet disc brakes, two-post foldable ROPS, and 64.7 liters (17.1 US gal.; 14.2 Imp. gal) fuel tank.
Following attachments are available for the Mahindra 6530 utility tractor:
- Mahindra ML262 loader
- Mahindra ML266 loader
- Mahindra 509 backhoe
- Mahindra 511 backhoe
Mahindra 6530 Specifications
| General Specifications | |
| Model | Mahindra 6530 |
| Length | 2WD: 3,500 mm (137.8 in) 4WD: 3,680 mm (145.0 in) |
| Width | 2WD: 1,960 mm (77.2 in) 4WD: 2,050 mm (81.0 in) |
| Height | – |
| Wheel base | – |
| Weight | 2WD: 2,520 kg (5,556 lbs) 4WD: 2,860 kg (6,300 lbs) |
| Fuel tank capacity | 64.7 liters (17.1 US gal.; 14.2 Imp. gal) |
| Battery | 12V, 96Ah |
| Cabin type | Two-post foldable ROPS |
| Engine | |
| Engine model | Mahindra |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 2.5 L, 2,497 cm2, (152.4 cu·in) |
| Bore and stroke | – |
| Compression ratio | 17.2:1 |
| Horsepower | 66 PS (48.5 kW; 65.0 HP) at 2,200 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Hydrostatic power |
| Brakes | Wet disc |
| Transmission model | – |
| Transmission type | Synchronized shuttle with cerametallic dry disc clutch |
| Gears | 8 forward and 8 reverse |
| Tires | |
| Front tires | Ag: 9.5×15 (2WD), 11.2×24 (4WD) |
| Rear tires | Ag: 16.9×28 (2WD), 16.9×30 (4WD) |
| Three-Point Hitch | |
| Caterogy | II/I |
| Control type | Position and draft control |
| Lift capacity (at ends) | 1799 kg (3967 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Valves | 2 |
| Pump flow | 10.8 gpm (40.9 lpm) |
| Steering flow | 4.7 gpm (17.8 lpm) |
| Total flow | 15.5 gpm (58.7 lpm) |
Be the first to comment