The Mahindra 6530 is a 2WD or 4WD utility tractor from the 30 series. This tractor was manufactured by Mahindra from 2008 to 2018. The Mahindra 6530 is equipped with a 2.5 L (152.4 cu·in) three-cylinder diesel engine and a synchronized shuttle transmission with cerametallic dry disc clutch and 8 forward and 8 reverse gears.
The Mahindra 6530 utility tractor used the Mahindra engine. It is a 2.5 L, 2,497 cm2, (152.4 cu·in) three-cylinder turbocharged intercooled diesel engine. The compression ratio rating is 17.2:1. This engine produced 66 PS (48.5 kW; 65.0 HP) at 2,200 rpm of output power.
The Mahindra 6530 is equipped with hydrostatic power steering, wet disc brakes, two-post foldable ROPS, and 64.7 liters (17.1 US gal.; 14.2 Imp. gal) fuel tank.
Following attachments are available for the Mahindra 6530 utility tractor:
- Mahindra ML262 loader
- Mahindra ML266 loader
- Mahindra 509 backhoe
- Mahindra 511 backhoe
Mahindra 6530 Specifications
General Specifications | |
Model | Mahindra 6530 |
Length |
2WD: 3,500 mm (137.8 in) 4WD: 3,680 mm (145.0 in) |
Width |
2WD: 1,960 mm (77.2 in) 4WD: 2,050 mm (81.0 in) |
Height | – |
Wheel base | – |
Weight |
2WD: 2,520 kg (5,556 lbs) 4WD: 2,860 kg (6,300 lbs) |
Fuel tank capacity | 64.7 liters (17.1 US gal.; 14.2 Imp. gal) |
Battery | 12V, 96Ah |
Cabin type | Two-post foldable ROPS |
Engine | |
Engine model | Mahindra |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 3 |
Fuel type | Diesel |
Displacement | 2.5 L, 2,497 cm2, (152.4 cu·in) |
Bore and stroke | – |
Compression ratio | 17.2:1 |
Horsepower | 66 PS (48.5 kW; 65.0 HP) at 2,200 rpm |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | Hydrostatic power |
Brakes | Wet disc |
Transmission model | – |
Transmission type | Synchronized shuttle with cerametallic dry disc clutch |
Gears | 8 forward and 8 reverse |
Tires | |
Front tires | Ag: 9.5×15 (2WD), 11.2×24 (4WD) |
Rear tires | Ag: 16.9×28 (2WD), 16.9×30 (4WD) |
Three-Point Hitch | |
Caterogy | II/I |
Control type | Position and draft control |
Lift capacity (at ends) | 1799 kg (3967 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent |
Rear PTO speed | 540 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Valves | 2 |
Pump flow | 10.8 gpm (40.9 lpm) |
Steering flow | 4.7 gpm (17.8 lpm) |
Total flow | 15.5 gpm (58.7 lpm) |