Mahindra 2810

Mahindra 2810The Mahindra 2810 is a 4WD compact utility tractor from the 10 series. This tractor was manufactured by TYM for distributor Mahindra in South Korea from 2002 to 2006. The Mahindra 2810 is equipped with a 1.4 L (85.0 cu·in) three-cylinder diesel engine and one of two transmissions: a synchomesh shuttle transmission with 12 forward and 12 reverse gears or a hydrostatic transmission with infinite (3-range) forward and reverse gears.

The Mahindra 2810 compact utility tractor used the Daedong 3A139 engine. It is a 1.4 L, 1,393 cm2, (85.0 cu·in) three-cylinder natural aspirated diesel engine with 80.0 mm (3.15 in) of the cylinder bore and 92.4 mm (3.64 in) of the piston stroke. This engine produced 28.4 PS (20.9 kW; 28.0 HP) at 2,700 rpm of output power.

The Mahindra 2810 is equipped with hydrostatic power steering, wet disc brakes, open operator station and 33.0 liters (8.7 US gal.; 7.3 Imp. gal) fuel tank.

Mahindra 2810 Specifications

General Specifications
ModelMahindra 2810
Length3,150 mm (124 in)
Width1,315 mm (51.8 in)
Height2,366 mm (93.1 in)
Wheel base1,640 mm (64.6 in)
Ground clearance325 mm (12.8 in)
Weight1,389 kg (3,062 lbs)
Fuel tank capacity33.0 liters (8.7 US gal.; 7.3 Imp. gal)
Battery12V, 60Ah
Cabin typeOpen operator station
Engine
Engine modelDaedong 3A139
Engine typeFour-stroke, liquid-cooled, inline
Cylinders3
Fuel typeDiesel
Displacement1.4 L, 1,393 cm2, (85.0 cu·in)
Bore and stroke80.0 mm X 92.4 mm (3.15 in X 3.64 in)
Horsepower28.4 PS (20.9 kW; 28.0 HP) at 2,700 rpm
StarterElectric
Coolant capacity:12.7 L (13.4 US. qt, 11.2 Imp. qt.)
Transmission and chassis
Chassis4×4 MFWD 4WD
Steering typeHydrostatic power
BrakesWet disc
Differential lockBevel gears with diff-Lock
Transmission model
Transmission typeSynchomesh shuttle
Gears12 forward and 12 reverse
Transmission model
Transmission typeHydrostatic
GearsInfinite (3-range) forward and reverse
Tires
Front tires Ag: 7-16
Rear tires Ag: 11.2-24
Three-Point Hitch
CategoryI
Control typePosition control
Lift capacity Gear: 941 kg (2,073 lbs)
Hydro: 943 kg (2,080 lbs)
PTO (Power take-off shaft)
Middle PTO typeIndependent (hydro only)
Middle PTO speed2000 rpm
Rear PTO typeIndependent with electro-hydraulic clutch
Rear PTO speed540 rpm
Hydraulic system
Hydraulic typeOpen center
Pump flow Gear: 5.88 gpm (22.3 lpm)
Hydro: 6.3 gpm (23.8 lpm)
Steering flow Gear: 3.07 gpm (11.6 lpm)
Hydro: 4.55 gpm (17.2 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*