The John Deere 2750 is a 2WD or 4WD utility tractor from the 2050 series. This tractor was manufactured by John Deere in Mannheim, Baden-Württemberg, Germany from 1983 to 1986. The John Deere 2750 is equipped with a 3.9 L (239.0 cu·in) four-cylinder diesel engine and one of three transmissions: a partially synchronized transmission with 8 forward and 4 reverse gears, a partial powershift transmission with 16 forward and 8 reverse gears or a partially synchronized transmission with 12 forward and 8 reverse gears.
The JD 2750 utility tractor used the John Deere engine. It is a 3.9 L, 3,916 cm2, (239.0 cu·in) four-cylinder turbocharged diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 16.8:1. This engine produced 76 PS (55.9 kW; 75.0 HP) at 2,500 rpm of PTO output power.
The John Deere 2750 is equipped with hydrostatic power steering, differential hydraulic wet disc brakes, two-post ROPS, or Sound-Gard cab with available heat and air-conditioning, and 98.5 liters (26 US gal.; 21.7 Imp. gal) fuel tank.
Following attachments are available for the JD 2750 utility tractor:
- John Deere 146 loader
- John Deere 175 loader
- John Deere 240 loader
- John Deere 245 loader
John Deere 2750 Specifications
| General Specifications | |
| Model | John Deere 2750 |
| Length | 2WD: 3,520 mm (138.6 in) 4WD: 3,470 mm (136.9 in) |
| Width | – |
| Height (Cab) | 2,590 mm (102 in) |
| Wheel base | 2WD: 2,260 mm (89.2 in) 4WD: 2,280 mm (90.0 in) |
| Ground clearance (front axle) | 2WD: 620 mm (24.4 in) 2WD: 480 mm (18.9 in) |
| Weight | 2WD with Cab: 3,725 kg (8,210 lbs) 4WD with Cab: 4,040 kg (8,910 lbs) |
| Fuel tank capacity | 98.5 liters (26 US gal.; 21.7 Imp. gal) |
| Battery | 12V |
| Cabin type | Two-post ROPS or Sound-Gard cab with available heat and air-conditioning. |
| Engine | |
| Engine model | John Deere |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 3.9 L, 3,916 cm2, (239.0 cu·in) |
| Bore and stroke | 106.0 mm X 110.0 mm (4.17 in X 4.33 in) |
| Compression ratio | 16.8:1 |
| Horsepower | 76 PS (55.9 kW; 75.0 HP) at 2,500 rpm |
| Starter | Electric |
| Coolant capacity: | 3.2 L (3.4 US. qt, 2.8 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Hydrostatic power |
| Brakes | Differential hydraulic wet disc |
| Differential lock | Rear standard |
| Transmission model | John Deere Top-Shaft Synchronized |
| Transmission type | Partially synchronized |
| Gears | 8 forward and 4 reverse |
| Speed | Forward: 28.0 kmh (17.4 mph) Reverse: 12.6 (7.8 mph) |
| Transmission model | John Deere Hi-Lo Top-Shaft Synchronized |
| Transmission type | Partial powershift |
| Gears | 16 forward and 8 reverse |
| Speed | Forward: 28.3 kmh (17.6 mph) Reverse: 12.7 (7.9 mph) |
| Transmission model | John Deere TSS Creeper |
| Transmission type | Partially synchronized |
| Gears | 12 forward and 8 reverse |
| Tires | |
| Front tires | Ag: 7.50-16 (2WD), 13.6-24 (4WD) |
| Rear tires | Ag: 18.4-30 (2WD), 15.5-38 (4WD) |
| Three-Point Hitch | |
| Caterogy | II/I |
| Control type | Load and depth control |
| Lift capacity (at ends) | 1,495 kg (3,295 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 540, 540/1,000 rpm |
| Hydraulic system | |
| Hydraulic type | Closed center |
| Pressure | 50.0 psi (3.4 bar) |
| Valves | 1 or 2 |
| Pump flow | 23.0 gpm (87.1 lpm) |
Be the first to comment