The Farmall 240 is a 2WD row-crop tractor manufactured by Farmall (a part of International Harvester) from 1958 to 1962. The Farmall 240 is equipped with a 2.0 L (122.7 cu·in) four-cylinder gasoline engine and a gear type transmission with 4 forward and 1 reverse gear and dry disc clutch.
The Farmall 240 row-crop tractor used the International Harvester C-123 engine. It is a 2.0 L, 2,011 cm2, (122.7 cu·in) four-cylinder natural aspirated gasoline engine with 79.0 mm (3.11 in) of the cylinder bore and 102.0 mm (4.02 in) of the piston stroke. The compression ratio rating is 7.3:1.
The Farmall 240 is equipped with manual steering, mechanical disc brakes, and an open operator station. This tractor could be equipped with the International Harvester 2001 loader.
Farmall 240 Specifications
| General Specifications | |
| Model | Farmall 240 |
| Length | – |
| Width | – |
| Height | – |
| Wheel base | 2,080 mm (81.9 in) |
| Weight | 1,706 kg (3,761 lbs) |
| Fuel tank capacity | – |
| Battery | 6V |
| Cabin type | Open operator station |
| Engine | |
| Engine model | International Harvester C-123 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Gasoline |
| Displacement | 2.0 L, 2,011 cm2, (122.7 cu·in) |
| Bore and stroke | 79.0 mm X 102.0 mm (3.11 in X 4.02 in) |
| Compression ratio | 7.3:1 |
| Horsepower | – |
| Starter | Electric |
| Oil capacity: | 4.7 L (5 US. qt, 4.1 Imp. qt.) |
| Coolant capacity: | 14.2 L (15 US. qt, 12.5 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Manual |
| Brakes | Mechanical disc |
| Transmission model | – |
| Transmission type | Gear type with dry disc clutch |
| Gears | 4 forward and 1 reverse |
| Speed | – |
| Tires | |
| Front tires | Ag: – |
| Rear tires | Ag: – |
| Three-Point Hitch | |
| Caterogy | IH Fast Hitch |
| Control type | – |
| Lift capacity (at ends) | – |
| PTO (Power take-off shaft) | |
| Rear PTO type | Live |
| Rear PTO speed | 540 rpm |
Be the first to comment