The Kioti CS2210 is a 4WD sub-compact utility tractor from the CS series. This tractor has been manufactured by Daedong since 2016. The Kioti CS2210 is equipped with a 1.1 L (69.0 cu·in) three-cylinder diesel engine and a hydrostatic transmission with infinite forward and reverse gears.
The Kioti CS2210 sub-compact utility tractor used the Shibaura S773L-F21 engine. It is a 1.1 L, 1,131 cm2, (69.0 cu·in) three-cylinder natural aspirated diesel engine with 77.0 mm (3.03 in) of the cylinder bore and 81.0 mm (3.19 in) of the piston stroke. The compression ratio rating is 24.0:1. This engine produced 21.4 PS (15.7 kW; 21.0 HP) at 3,000 rpm of output power.
The Kioti CS2210 is equipped with power steering, wet disc brakes, two-post folding ROPS or cab (optional), and 25.4 liters (6.7 US gal.; 5.6 Imp. gal) fuel tank.
Following attachments are available for the Kioti CS2210 sub-compact utility tractor:
- Mid-mount Kioti SM2410 1,520 mm (60 in) mower deck with 3-blades
 - Mid-mount Kioti SL2410 loader
 - Mid-mount Kioti SB2410L backhoe
 
Kioti CS2210 Specifications
| General Specifications | |
| Model | Kioti CS2210 | 
| Length | 2,520 mm (99.2 in) | 
| Width | 1,180 mm (46.5 in) | 
| Height | 2,230 mm (87.8 in) | 
| Wheel base | 1,390 mm (54.7 in) | 
| Ground clearance | 160 mm (6.3 in) | 
| Weight | 673 kg (1,484 lbs) | 
| Fuel tank capacity | 25.4 liters (6.7 US gal.; 5.6 Imp. gal) | 
| Battery | 12V | 
| Cabin type | Two-post folding ROPS or Cab (optional) | 
| Engine | |
| Engine model | Shibaura S773L-F21 | 
| Engine type | Four-stroke, liquid-cooled, inline | 
| Cylinders | 3 | 
| Fuel type | Diesel | 
| Displacement | 1.1 L, 1,131 cm2, (69.0 cu·in) | 
| Bore and stroke | 77.0 mm X 81.0 mm (3.03 in X 3.19 in) | 
| Compression ratio | 24.0:1 | 
| Horsepower | 21.4 PS (15.7 kW; 21.0 HP) at 3,000 rpm | 
| Starter | Electric | 
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD | 
| Steering type | Power | 
| Brakes | Wet disc | 
| Differential lock | Mechanical rear | 
| Transmission model | – | 
| Transmission type | Hydrostatic | 
| Gears | Infinite forward and reverse | 
| Speed | Forward: 16.6 kmh (10.3 mph) Reverse: 11.3 (7 mph) | 
| Tires | |
| Front tires | Industrial: 18×8.5-10 | 
| Rear tires | Industrial: 26×12.00-12 | 
| Three-Point Hitch | |
| Category | I | 
| Control type | Position control | 
| Lift capacity (at 610 mm /24 in) | 317 kg (700 lbs) | 
| PTO (Power take-off shaft) | |
| Middle PTO type | Independent | 
| Middle PTO speed | 2,200 rpm | 
| Rear PTO type | Independent | 
| Rear PTO speed | 540 rpm | 
| Hydraulic system | |
| Hydraulic type | Open center | 
| Total flow | 6.5 gpm (24.6 lpm) | 

Is there a front snow blower attachment for the CS2210?