Kioti DK35

Kioti DK35The Kioti DK35 is a 4WD compact utility tractor manufactured by Kioti (a part of Daedong) in Daegu, South Korea from 2001 to 2007. The Kioti DK35 is equipped with a 1.6 L (100.5 cu·in) three-cylinder diesel engine and a syncronized shuttle transmission with 8 forward and 8 reverse gears.

The Kioti DK35 compact utility tractor used the Daedong 3A165 engine. It is a 1.6 L, 1,647 cm2, (100.5 cu·in) three-cylinder natural aspirated diesel engine with 87.0 mm (3.43 in) of the cylinder bore and 92.4 mm (3.64 in) of the piston stroke. This engine produced 35.5 PS (26.1 kW; 35.0 HP) at 2,700 rpm of output power.

The Kioti DK35 is equipped with hydrostatic power steering, wet disc brakes, Foldable ROPS and 43.5 liters (11.5 US gal.; 9.6 Imp. gal) fuel tank.

Kioti DK35 Specifications

General Specifications
Model Kioti DK35
Length 3,200 mm (126.0 in)
Width 1,450 mm (57.1 in)
Height (ROPS) 2,340 mm (92.1 in)
Wheel base 1,660 mm (65.4 in)
Ground clearance 280 mm (11.0 in)
Weight 1,575 kg (3,472 lbs)
Fuel tank capacity 43.5 liters (11.5 US gal.; 9.6 Imp. gal)
Battery 12V
Cabin type Foldable ROPS
Engine
Engine model Daedong 3A165
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.6 L, 1,647 cm2, (100.5 cu·in)
Bore and stroke 87.0 mm X 92.4 mm (3.43 in X 3.64 in)
Horsepower 35.5 PS (26.1 kW; 35.0 HP) at 2,700 rpm
Starter Electric
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Wet disc
Transmission model
Transmission type Syncronized shuttle
Gears 8 forward and 8 reverse
Speed Forward: 23.0 kmh (14.3 mph) Reverse: 21.2 kmh (13.2 mph)
Tires
Front tires Ag: 7-16
Lawn/turf: 27×8.50-15
Industrial: 10×16.5
Rear tires Ag: 12.4-24
Lawn/turf: 41×14-20
Industrial: 14.9×24
Three-Point Hitch
Category I
Control type
Lift capacity (at ends) 1,030 kg (2,270 lbs)
PTO (Power take-off shaft)
Middle PTO type
Middle PTO speed 2000 rpm
Rear PTO type Independent
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type
Hydraulic capacity 29.5 L (7.8 US. gal, 6.5 Imp. gal.)
Valves 0 or 1
Pump flow 12.5 gpm (47.3 lpm)
Steering flow 4.7 gpm (17.8 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*