CaseIH 1494

CaseIH 1494The CaseIH 1494 is a 2WD or 4WD utility tractor from the 94 series. This tractor was manufactured by CaseIH from 1983 to 1988. The CaseIH 1494 is equipped with a 3.6 L (219.0 cu·in) four-cylinder diesel engine and one of two transmissions: a synchromesh transmission with 12 forward and 4 reverse gears or a partial power shift transmission with 12 forward and 4 reverse gears.

The CaseIH 1494 utility tractor used the Case engine. It is a 3.6 L, 3,589 cm2, (219.0 cu·in) four-cylinder turbocharged diesel engine with 100.0 mm (3.94 in) of the cylinder bore and 114.0 mm (4.49 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 86.2 PS (63.4 kW; 85.0 HP) at 2,200 rpm of output power and 296.0 N·m (30.2 kg·m, 218.2 ft·lb) at 1,600 rpm of peak torque.

The CaseIH 1494 is equipped with power steering, disc brakes, cab optional with air-conditioning, and 136.0 liters (35.9 US gal.; 29.9 Imp. gal) fuel tank.

CaseIH 1494 Specifications

General Specifications
Model CaseIH 1494
Length 3,740 mm (147.2 in)
Width 1,900 mm (74.8 in)
Height (cab) 2,590 mm (102 in)
Wheel base 2,240 mm (88.2 in)
Ground clearance 2WD: 410 mm (16.1 in)
4WD: 350 mm (13.8 in)
Weight 2WD Synchromesh: 3,345 kg (7,375 lbs)
2WD Hydra-Shift: 3,475 kg (7,660 lbs)
4WD Synchromesh: 3,630 kg (8,005 lbs)
4WD Hydra-Shift: 3,710 kg (8,180 lbs)

Fuel tank capacity 136.0 liters (35.9 US gal.; 29.9 Imp. gal)
Battery 12V, 96 Ah, CCA 550A
Cabin type Cab optional with air-conditioning
Engine
Engine model Case
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 3.6 L, 3,589 cm2, (219.0 cu·in)
Bore and stroke 100.0 mm X 114.0 mm (3.94 in X 4.49 in)
Compression ratio 16.0:1
Horsepower 86.2 PS (63.4 kW; 85.0 HP) at 2,200 rpm
Torque 296.0 N·m (30.2 kg·m, 218.2 ft·lb) at 1,600 rpm
Starter Electric
Oil capacity: 7.4 L (7.8 US. qt, 6.5 Imp. qt.)
Coolant capacity: 14.2 L (15 US. qt, 12.5 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Disc
Transmission model
Transmission type Synchromesh
Gears 12 forward and 4 reverse
Transmission oil capacity 31.8 L (8.4 US. gal, 7 Imp. gal.)
Transmission model Hydra-Shift
Transmission type Partial power shift
Gears 12 forward and 4 reverse
Transmission oil capacity 31.8 L (8.4 US. gal, 7 Imp. gal.)
Tires
Front tires Ag: 7.50-16 (2WD), 12.4-24 (4WD)
Rear tires Ag: 18.4-34
Three-Point Hitch
Category II
Control type
Lift capacity (at ends) 2,435 kg (5,340 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540/1000 rpm
Hydraulic system
Hydraulic type Open center
Pressure 2475 psi (170.6 bar)
Valves 1 to 3
Steering flow 7.7 gpm (29.1 lpm)
Total flow 8.5 gpm (32.2 lpm)
15.3 gpm (57.9 lpm) (tandem)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*