CaseIH 685

CaseIH 685The CaseIH 685 is a 2WD/4WD utility tractor from the 85 Utility series. This tractor was manufactured by CaseIH in Doncaster, England from 1985 to 1990. The CaseIH 685 is equipped with a 3.9 L (239.0 cu·in) four-cylinder diesel engine and one of two transmissions: a gear type transmission with 8 forward and 4 reverse gears or a two-speed power shift transmission with 16 forward and 8 reverse gears.

The CaseIH 685 utility tractor used the CaseIH D239 engine. It is a 3.9 L, 3,916 cm2, (239.0 cu·in) four-cylinder natural aspirated diesel engine with 98.0 mm (3.86 in) of the cylinder bore and 129.0 mm (5.08 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 74 PS (54.4 kW; 73.0 HP) at 2,400 rpm of output power.

The CaseIH 685 is equipped with power steering, differential hydraulic wet disc brakes, Two-post ROPS or Cab (optional) and 75.7 liters (20 US gal.; 16.7 Imp. gal) fuel tank.

CaseIH 685 Specifications

General Specifications
ModelCaseIH 685
Length3,590 mm (141.3 in)
Height 2WD: 2,370 mm (93.3 in)
4WD: 2,450 mm (96.5 in)
Wheel base2,140 mm (84.3 in)
Weight (operating) 2WD: 2,567 kg (5,659 lbs)
Fuel tank capacity75.7 liters (20 US gal.; 16.7 Imp. gal)
Cabin typeTwo-post ROPS or Cab (optional)
Engine modelCaseIH D239
Engine typeFour-stroke, liquid-cooled, inline
Fuel typeDiesel
Displacement3.9 L, 3,916 cm2, (239.0 cu·in)
Bore and stroke98.0 mm X 129.0 mm (3.86 in X 5.08 in)
Compression ratio16.0:1
Horsepower74 PS (54.4 kW; 73.0 HP) at 2,400 rpm
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD
Steering typePower
BrakesDifferential hydraulic wet disc
Transmission model
Transmission typeGear type with dry disc clutch
Gears8 forward and 4 reverse
Transmission model
Transmission typeTwo-speed power shift with dry disc clutch
Gears16 forward and 8 reverse
Speed Forward: 30.7 kmh (19.1 mph) Reverse: 9.7 kmh (6.0 mph)
Front tires Ag: 7.50-16
Rear tires Ag: 16.9-30
Three-Point Hitch
Control type
Lift capacity (at 610 mm/24 in)1,478 kg (3,260 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO speed540/1000 rpm
Hydraulic system
Hydraulic typeOpen center
Hydraulic capacity34.1 L (9.0 US. gal, 7.5 Imp. gal.)
Pressure2500 psi (172.4 bar)
Valves1 or 2
Pump flow15.8 gpm (59.8 lpm)
Total flow18.6 gpm (70.4 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.