The Cub Cadet Z-Force 44 is a 2WD zero-turn mower from the Z-Force series. This tractor was manufactured by Cub Cadet (a part of MTD) during 2004. The Cub Cadet Z-Force 44 is equipped with a 0.7 L (40.0 cu·in) V-twin gasoline engine and a hydrostatic transmission with infinite forward and reverse gears.
The Cub Cadet Z-Force 44 zero-turn mower used the Briggs and Stratton 406577 engine. It is a 0.7 L, 656 cm2, (40.0 cu·in) V-twin natural aspirated gasoline engine with 75.0 mm (2.95 in) of the cylinder bore and 73.0 mm (2.87 in) of the piston stroke. This engine produced 20.3 PS (14.9 kW; 20.0 HP) at 3,300 rpm of output power.
The Cub Cadet Z-Force 44 is equipped with power steering, an open operator station and 18.9 liters (5 US gal.; 4.2 Imp. gal) fuel tank.
Cub Cadet Z-Force 44 Specifications
| General Specifications | |
| Model | Cub Cadet Z-Force 44 |
| Length | 1,750 mm (68.9 in) |
| Width | – |
| Height | – |
| Wheel base | 1,140 mm (44.9 in) |
| Weight | – |
| Fuel tank capacity | 18.9 liters (5 US gal.; 4.2 Imp. gal) |
| Battery | 12V, CCA 275A |
| Cabin type | Open operator station |
| Engine | |
| Engine model | Briggs and Stratton 406577 |
| Engine type | Four-stroke, air-cooled, V-twin |
| Cylinders | 2 |
| Fuel type | Gasoline |
| Displacement | 0.7 L, 656 cm2, (40.0 cu·in) |
| Bore and stroke | 75.0 mm X 73.0 mm (2.95 in X 2.87 in) |
| Horsepower | 20.3 PS (14.9 kW; 20.0 HP) at 3,300 rpm |
| Starter | Electric |
| Oil capacity: | 1.8 L (1.9 US. qt, 1.6 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Power |
| Brakes | – |
| Transmission model | Hydro-Gear |
| Transmission type | Hydrostatic |
| Gears | Infinite forward and reverse |
| Speed | Forward: 11.3 kmh (7.0 mph) Reverse: 6.4 kmh (4.0 mph) |
| Tires | |
| Front tires | Lawn/turf: 11x4x5 |
| Rear tires | Lawn/turf: 18×8.5×8 |
| PTO (Power take-off shaft) | |
| Middle PTO type | Independent with electric clutch |
| Middle PTO speed | – |