The Cub Cadet 7195 is a 4WD compact utility tractor from the 7000 series. This tractor was manufactured by Mitsubishi for distributor Cub Cadet from 1996 to 1997. The Cub Cadet 7195 is equipped with a 1.1 L (64.7 cu·in) three-cylinder diesel engine and a hydrostatic transmission with infinite (2-range) forward and reverse gears.
The Cub Cadet 7195 compact utility tractor used the Mitsubishi K3E engine. It is a 1.1 L, 1,060 cm2, (64.7 cu·in) three-cylinder natural aspirated diesel engine with 76.0 mm (2.99 in) of the cylinder bore and 78.0 mm (3.07 in) of the piston stroke. The compression ratio rating is 23.0:1. This engine produced 19.3 PS (14.2 kW; 19.0 HP) at 2,500 rpm of output power.
The Cub Cadet 7195 is equipped with hydrostatic power steering, expanding dry shoe brakes, two-post foldable ROPS, and 20.1 liters (5.3 US gal.; 4.4 Imp. gal) fuel tank.
Following attachments are available for the Cub Cadet 7195 compact utility tractor:
- Mid-mount Cub Cadet 401: 1,520 mm (60 in) mower deck
- Cub Cadet 416 loader
Cub Cadet 7195 Specifications
| General Specifications | |
| Model | Cub Cadet 7195 |
| Length | 2,700 mm (106.3 in) |
| Width | 1,170 mm (46.1 in) |
| Height (ROPS) | 2,000 mm (78.7 in) |
| Wheel base | 1,470 mm (57.9 in) |
| Weight | 905 kg (1,995 lbs) |
| Fuel tank capacity | 20.1 liters (5.3 US gal.; 4.4 Imp. gal) |
| Battery | 12V |
| Cabin type | Two-post foldable ROPS |
| Engine | |
| Engine model | Mitsubishi K3E |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 1.1 L, 1,060 cm2, (64.7 cu·in) |
| Bore and stroke | 76.0 mm X 78.0 mm (2.99 in X 3.07 in) |
| Compression ratio | 23.0:1 |
| Horsepower | 19.3 PS (14.2 kW; 19.0 HP) at 2,500 rpm |
| Starter | Electric |
| Oil capacity: | 3.5 L (3.7 US. qt, 3.1 Imp. qt.) |
| Coolant capacity: | 5.7 L (6 US. qt, 5 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Hydrostatic power |
| Brakes | Expanding dry shoe |
| Differential lock | Rear standard |
| Transmission model | – |
| Transmission type | Hydrostatic |
| Gears | Infinite (2-range) forward and reverse |
| Transmission oil capacity | 18.0 L (4.8 US. gal, 4 Imp. gal.) |
| Tires | |
| Front tires | Lawn/turf: 23×8.50-12 Ag: 6.00-12 |
| Rear tires | Lawn/turf: 33×12.50-15 Ag: 9.50-16 |
| Three-Point Hitch | |
| Category | I |
| Control type | Position control |
| Lift capacity (at ends) | 635 kg (1,400 lbs) |
| PTO (Power take-off shaft) | |
| Middle PTO type | Live or independent |
| Middle PTO speed | 2,000 rpm |
| Rear PTO type | Live or independent |
| Rear PTO speed | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Pressure | 2,133 psi (147.1 bar) |
| Pump flow | 5.4 gpm (20.4 lpm) |
| Steering flow | 3.2 gpm (12.1 lpm) |
| Total flow | 8.6 gpm (32.6 lpm) |
Be the first to comment