Cub Cadet 5264

Cub Cadet 5264The Cub Cadet 5264 is a 4WD sub-compact utility tractor from the 5000 series. This tractor was manufactured by Cub Cadet from 2006 to 2008. The Cub Cadet 5264 is equipped with a 1.0 L (58.1 cu·in) three-cylinder diesel engine and a hydrostatic transmission with infinite forward and reverse gears.

The Cub Cadet 5264 sub-compact utility tractor used the Daihatsu engine. It is a 1.0 L, 952 cm2, (58.1 cu·in) three-cylinder natural aspirated diesel engine with 72.0 mm (2.83 in) of the cylinder bore and 75.0 mm (2.95 in) of the piston stroke. This engine produced 26.4 PS (19.4 kW; 26 HP) at 3,600 rpm of output power.

The Cub Cadet 5264 is equipped with hydrostatic power steering, external dual disc brakes, two-post foldable ROPS, and 21.2 liters (5.6 US gal.; 4.7 Imp. gal) fuel tank.

Following attachments are available for the Cub Cadet 5264 sub-compact utility tractor:

  • Mid-mount Cub Cadet 54 in (1,370 mm) mower deck
  • Mid-mount Cub Cadet 60 in (1,520 mm) mower deck
  • Front-mount Cub Cadet 60 in (1,520 mm) blade
  • Front-mount Cub Cadet 48 in (1,210 mm) snow blower
  • Front-mount Cub Cadet 812 loader

Cub Cadet 5264 Specifications

General Specifications
Model Cub Cadet 5264
Length 2,150 mm (84.6 in)
Width 1,140 mm (44.9 in)
Height (ROPS) 2,080 mm (81.9 in)
Wheel base 1,390 mm (54.7 in)
Ground clearance 120 mm (4.7 in)
Weight 612 kg (1,349 lbs)
Fuel tank capacity 21.2 liters (5.6 US gal.; 4.7 Imp. gal)
Battery 12V, CCA 500A
Cabin type Two-post foldable ROPS
Engine model Daihatsu
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.0 L, 952 cm2, (58.1 cu·in)
Bore and stroke 72.0 mm X 75.0 mm (2.83 in X 2.95 in)
Horsepower 26.4 PS (19.4 kW; 26.0 HP) at 3,600 rpm
Starter Electric
Oil type SAE 10W-30, 10W-40
Oil capacity: 3.3 L (3.5 US. qt, 2.9 Imp. qt.)
Coolant capacity: 5.0 L (5.3 US. qt, 4.4 Imp. qt.)
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes External dual disc
Differential lock Mechanical rear
Transmission model
Transmission type Hydrostatic
Gears Infinite forward and reverse
Speed Forward: 12.9 kmh (8 mph) Reverse: 6.4 kmh (4 mph)
Transmission oil capacity 18.9 L (5 US. gal, 4.2 Imp. gal.)
Front tires Ag: 18×9.5-8
Lawn/turf: 18×8.5-8
Rear tires Ag: 26×12-12
Lawn/turf: 26×12-12
Three-Point Hitch
Category I
Control type
Lift capacity (at ends) 464 kg (1,023 lbs)
PTO (Power take-off shaft)
Middle PTO type Independent
Middle PTO speed 2000 rpm
Rear PTO type Independent
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 18.9 L (5 US. gal, 4.2 Imp. gal.)
Pressure 1500 psi (103.4 bar)
Valves 1 (optional)
Total flow 5.5 gpm (20.8 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.