Cub Cadet RZT 50 KH

Cub Cadet RZT 50 KHThe Cub Cadet RZT 50 KH is a 2WD zero-turn mower from the RZT series. This tractor was manufactured by the Cub Cadet (a part of MTD) from 2011 to 2012. The Cub Cadet RZT 50 KH is equipped with a 0.7 L V-twin gasoline engine and hydrostatic transmission with infinite forward and reverse gears.

The Cub Cadet RZT 50 KH zero-turn mower used the Kohler SV730 engine. It is a 0.7 L, 725 cm2, (44.2 cu·in) V-twin natural aspirated gasoline engine with 83.0 mm (3.27 in) of the cylinder bore and 67.0 mm (2.64 in) of the piston stroke. This engine produced 23.4 PS (17.2 kW; 23.0 HP) of maximum output power.

The Cub Cadet RZT 50 KH is equipped with differential power steering, open operator station and 10.6 liters (2.8 US gal.; 2.3 Imp. gal) fuel tank. The Cub Cadet RZT 50 KH used mid-mount Cub Cadet 50 in (1,270 mm) mower deck with 3-blades.

Cub Cadet RZT50KH Specifications

General Specifications
ModelCub Cadet RZT 50 KH
Length2,030 mm (79.9 in)
Width
Height910 mm (35.8 in)
Wheel base1,100 mm (43.3 in)
Weight239 kg (527 lbs)
Fuel tank capacity10.6 liters (2.8 US gal.; 2.3 Imp. gal)
Battery12V, CCA: 230A
Cabin typeOpen operator station
Engine
Engine modelKohler SV730
Engine typeFour-stroke, air-cooled, V-twin
Cylinders2
Fuel typeGasoline
Displacement0.7 L, 725 cm2, (44.2 cu·in)
Bore and stroke83.0 mm X 67.0 mm (3.27 in X 2.64 in)
Horsepower23.4 PS (17.2 kW; 23.0 HP)
StarterElectric
Oil typeSAE 10W-40, 10W-30
Transmission and chassis
Chassis4×2 2WD
Steering typeDifferential power
Brakes
Transmission modelHydro-Gear EZT
Transmission typeHydrostatic
GearsInfinite forward and reverse
Speed Forward: 11.3 kmh (7 mph) Reverse: 6.4 (4 mph)
Tires
Front tiresLawn/turf: 13×5.0-6
Rear tiresLawn/turf: 18×9.5-8
PTO (Power take-off shaft)
Middle PTO typeIndependent with electric clutch
Middle PTO spped
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

1 Comment

Leave a Reply

Your email address will not be published.


*