Cub Cadet RZT 50 VT

Cub Cadet RZT 50 VTThe Cub Cadet RZT 50 VT is a 2WD zero-turn mower from the RZT series. This tractor was manufactured by the Cub Cadet (a part of MTD) from 2009 to 2010. The Cub Cadet RZT 50 VT is equipped with a 0.7 L V-twin gasoline engine and hydrostatic transmission with infinite forward and reverse gears.

The Cub Cadet RZT 50 VT zero-turn mower used the Briggs & Stratton 44P777 engine. It is a 0.7 L, 724 cm2, (44.2 cu·in) V-twin natural aspirated gasoline engine with 79.0 mm (3.11 in) of the cylinder bore and 73.0 mm (2.87 in) of the piston stroke. This engine produced 24.3 PS (17.9 kW; 24.0 HP) of maximum output power.

The Cub Cadet RZT 50 VT is equipped with differential power steering, open operator station and 11.5 liters (3 US gal.; 2.5 Imp. gal) fuel tank. The Cub Cadet RZT 50 VT used mid-mount Cub Cadet 50 in (1,270 mm) mower deck with 3-blades.

Cub Cadet RZT50VT Specifications

General Specifications
Model Cub Cadet RZT 50 VT
Length 1,700 mm (66.9 in)
Width
Height
Wheel base 1,100 mm (43.3 in)
Weight 239 kg (527 lbs)
Fuel tank capacity 11.5 liters (3 US gal.; 2.5 Imp. gal)
Battery 12V
Cabin type Open operator station
Engine
Engine model Briggs & Stratton 44P777
Engine type Four-stroke, air-cooled, V-twin
Cylinders 2
Fuel type Gasoline
Displacement 0.7 L, 724 cm2, (44.2 cu·in)
Bore and stroke 79.0 mm X 73.0 mm (3.11 in X 2.87 in)
Horsepower 24.3 PS (17.9 kW; 24.0 HP)
Starter Electric
Oil type SAE 10W-40, 10W-30
Transmission and chassis
Chassis 4×2 2WD
Steering type Differential power
Brakes
Transmission model Hydro-Gear EZT
Transmission type Hydrostatic
Gears Infinite forward and reverse
Speed Forward: 9.7 kmh (6 mph) Reverse: 4.8 (3 mph)
Tires
Front tires Lawn/turf: 13×5.0-6
Rear tires Lawn/turf: 18×9.5-8
PTO (Power take-off shaft)
Middle PTO type Independent with electric clutch
Middle PTO spped
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*