Farmall 460

Farmall 460The Farmall 460 is a two-wheel drive (2WD) row-crop tractor, manufactured by International Harvester (IH) between 1958 and 1963. The Farmall 460 tractor is equipped with C-221 6-cylinder gasoline or D-236 diesel-powered engine and sliding gear transmission with 5 forward and 1 reverse gear. This row-crop tractor was the smallest of the six-cylinder tractors in the new line, rated for four plows.

The International Harvester C221 engine operates with gasoline or optional LP (liquefied petroleum) gas. A 90.0 mm (3.54 in) cylinder bore and 94.0 mm (3.7 in) piston stroke give the C221 motor a total of 3.6 L (221 cu-in) of displacement. Compression ratio rating is 7.2:1 for gasoline version, the LP gas version slightly higher at 8.75:1. Both the gasoline and LP gas versions of the C221 engine provide 50 HP (37.3 kW) and 1,800 rpm.

The Farmall 460 has an optional six-cylinder, International Harvester D236 diesel-powered engine with 3.9 L (236 cu-in) of displacement. The D236 engine has a 94.0 mm (3.7 in) of the cylinder bore and 94.0 mm (3.7 in) of piston stroke and providing identical 50 HP (37.3 kW) and 1,800 rpm of the C-221.

The 460 is equipped with a sliding gear transmission. The transmission has 5 forward (2.4-26.7 km/h, 2.6-16.6 mph) and 1 reverse (5.1 km/h, 3.2 mph) gears.

The tractor used power steering and differential mechanical disc brakes. The Farmall 460 has an open operator station.

Farmall 460 Specifications

General Specifications
ModelFarmall 460
Length 3550 mm (140 in.)
Hi-Clear: 3,880 mm (153.0 in.)
Width 2,120-2,660 mm (83.5-105 in.)
Hi-Clear: 2,180 mm (86.0 in.)
Height 1,980 mm (78.0 in.)
Hi-Clear: 2,280 mm (90.0 in.)
Wheelbase 2,410 mm (95.0 in.)
Hi-Clear: 2,254 mm (100.0 in.)
Weight Gas version: 2,646 kg (5,835 lb)
Diesel version: 2,746 kg (6,055 lb)
Fuel tank capacity
Battery Gas version: 1 x 12 Volts
Diesel version: 2 x 6 Volts
Tires size
Front tires 5.50-16
Hi-Clear: 6.00-20
Rear tires 12.4-38
Hi-Clear: 11-38
Engine C221
Engine modelIH C221
FuelGasoline / LP gas
Displacement3.6 L (221 cu.in.)
Bore x stroke90.0 x 94.0 mm (3.54 x 3.7 in)
Power output50.0 HP (37.3 kW) at 1,800 rpm
Torque
Starter typeElectric (12 Volts)
Oil type
Oil capacity
Coolant capacity
Engine D236
Engine modelIH D236
FuelDiesel
Displacement3.9 L (236 cu.in.)
Bore x stroke94.0 x 94.0 mm (3.7 x 3.7 in)
Power output50.0 HP (37.3 kW) at 1,800 rpm
Torque
Starter typeElectric (12 Volts)
Oil type
Oil capacity8.5 L (9.0 qts)
Coolant capacity
Transmission and chassis
Chassis4×2 2WD
SteeringPower
Transmission typeSliding gear
Gears5 forward and 2 reverse
Ground speed Forward: 2.4-26.7 km/h (2.6-16.6 mph)
Reverse: 5.1 km/h (3.2 mph)
PTO (Power take-off shaft)
PTO Type:Rear, independent
PTO Speed:540 rpm
Hydraulic lift
3-point linkage:IH Fast Hitch
Control system:
No. of remote valves:2
Max lifting capacity (at link end):
Hydraulic system
Type:Closed center
Hydraulic luid capacity:37.9 L (10 US.gal.)
Hydraulic flow:45.4 lpm (12 gpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*