Farmall Super A

Farmall Super AThe Farmall Super A is a 2WD row-crop tractor manufactured by International Harvester in Chicago, Illinois, USA, or in Louisville, Kentucky, USA from 1947 to 1953. The Farmall Super A is equipped with a 1.9 L (113.0 cu·in) four-cylinder gasoline / kerosine engine and sliding gear transmission with 4 forward and 1 reverse gear.

The Farmall Super A row-crop tractor used the International Harvester C113 engine. It is a 1.9 L, 1,852 cm2, (113.0 cu·in) four-cylinder natural aspirated gasoline / kerosine engine with 76.0 mm (2.99 in) of the cylinder bore and 102.0 mm (4.02 in) of the piston stroke. The compression ratio rating is 6.0:1. This engine produced 16.2 PS (11.9 kW; 16.0 HP) of PTO output power.

The Farmall Super A is equipped with manual steering, differential mechanical contracting band brakes, open operator station and 37.9 liters (10 US gal.; 8.3 Imp. gal) fuel tank.

Farmall Super A Specifications

General Specifications
Model Farmall Super A
Length 2,710 mm (106.7 in)
Width 1,410 mm (55.5 in)
Height 2,070 mm (81.5 in)
Wheel base 1,800 mm (70.9 in)
Weight 1,090 kg (2,403 lbs)
Fuel tank capacity 37.9 liters (10 US gal.; 8.3 Imp. gal)
Battery 6V
Cabin type Open operator station
Engine
Engine model International Harvester C113
Engine type Four-stroke, air-cooled, inline
Cylinders 4
Fuel type Gasoline
Displacement 1.9 L, 1,852 cm2, (113.0 cu·in)
Bore and stroke 76.0 mm X 102.0 mm (2.99 in X 4.02 in)
Compression ratio 6.0:1
Horsepower 16.2 PS (11.9 kW; 16.0 HP)
Starter Electric
Oil type SAE 20W
Oil capacity: 4.7 L (5 US. qt, 4.1 Imp. qt.)
Coolant capacity: 12.3 L (13 US. qt, 10.8 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Manual
Brakes Differential mechanical contracting band
Transmission model
Transmission type Sliding gear
Gears 4 forward and 1 reverse
Speed Forward: 16.1 kmh (10 mph) Reverse: 4.6 (2.9 mph)
Transmission oil capacity 3.8 L (1 US. gal, 0.8 Imp. gal.)
Tires
Front tires Ag: 5.00-15
Rear tires Ag: 9-24
Rear Hitch
Type Mid-mount Touch Control rockshaft
PTO (Power take-off shaft)
Rear PTO type Transmission
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type IH Touch-Control
Hydraulic capacity 7.9 L (8.35 US. qt, 6.95 Imp. qt.)
Valves 1
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*