The Farmall C is a 2WD row-crop tractor manufactured by International Harvester from 1948 to 1951. The Farmall C is equipped with a 1.9 L four-cylinder gasoline engine and sliding gear type transmission with dry disc clutch and 4 forward and 1 reverse gear.
The Farmall C row-crop tractor used the International Harvester C113 engine. It is a 1.9 L, 1,853 cm2, (113.1 cu·in) four-cylinder natural aspirated gasoline engine with 76.0 mm (2.99 in) of the cylinder bore and 102.0 mm (4.02 in) of the piston stroke. The compression ratio rating is 5.3:1. This engine produced 23.4 PS (17.2 kW; 23.0 HP) of output power.
The Farmall C is equipped with manual steering, manual contracting band brakes, open operator station and 41.6 liters (11 US gal.; 9.2 Imp. gal) fuel tank.
Farmall C Specifications
General Specifications | |
Model | Farmall C |
Length | – |
Width | – |
Height | – |
Wheel base | – |
Weight | 1,290 kg (2,845 lbs) |
Fuel tank capacity | 41.6 liters (11 US gal.; 9.2 Imp. gal) |
Battery | 6V |
Cabin type | Open operator station |
Engine | |
Engine model | International Harvester C113 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Gasoline |
Displacement | 1.9 L, 1,853 cm2, (113.1 cu·in) |
Bore and stroke | 76.0 mm X 102.0 mm (2.99 in X 4.02 in) |
Compression ratio | 5.3:1 |
Horsepower | 23.4 PS (17.2 kW; 23.0 HP) |
Starter | Electric |
Oil capacity: | 4.7 L (5 US. qt, 4.1 Imp. qt.) |
Spark plug gap | 0.63 mm (0.025 in) |
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Manual |
Brakes | Manual contracting band |
Transmission model | – |
Transmission type | Sliding gear with dry disc clutch |
Gears | 4 forward and 1 reverse |
Speed | Forward: 16.5 kmh (10.3 mph) Reverse: 4.8 (3 mph) |
Tires | |
Front tires | Ag: 4.00-16 |
Rear tires | Ag: 9-36 |
PTO (Power take-off shaft) | |
Rear PTO type | – |
Rear PTO speed | 540 rpm |