The Farmall 200 is a 2WD row-crop tractor manufactured by Farmall (a part of International Harvester) from 1954 to 1956. The Farmall 200 is equipped with a 2.0 L (122.7 cu·in) four-cylinder gasoline engine and a sliding gear with dry disc clutch transmission with 4 forward and 1 reverse gears.
The Farmall 200 row-crop tractor used the International Harvester C123 engine. It is a 2.0 L, 2,011 cm2, (122.7 cu·in) four-cylinder natural aspirated gasoline engine with 79.0 mm (3.11 in) of the cylinder bore and 102.0 mm (4.02 in) of the piston stroke. The compression ratio rating is 6.5:1.
The Farmall 200 is equipped with manual steering, differential mechanical dry disc brakes, and an open operator station.
Farmall 200 Specifications
|Wheel base||2,080 mm (81.9 in)|
|Weight||1,606 kg (3,541 lbs)|
|Fuel tank capacity||–|
|Cabin type||Open operator station|
|Engine model||International Harvester C123|
|Engine type||Four-stroke, liquid-cooled, inline|
|Displacement||2.0 L, 2,011 cm2, (122.7 cu·in)|
|Bore and stroke||79.0 mm X 102.0 mm (3.11 in X 4.02 in)|
|Oil capacity:||4.7 L (5 US. qt, 4.1 Imp. qt.)|
|Transmission and chassis|
|Brakes||Differential mechanical dry disc|
|Transmission type||Sliding gear with dry disc clutch|
|Gears||4 forward and 1 reverse|
|Speed||Forward: 17.1 kmh (10.6 mph) Reverse: 5.0 kmh (3.1 mph)|
|Front tires||Ag: 5.00-15|
|Rear tires||Ag: 10-36|
|PTO (Power take-off shaft)|
|Rear PTO type||–|
|Rear PTO speed||540 rpm|
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment