Farmall B

Farmall BThe Farmall B is a 2WD row-crop tractor manufactured by Farmall (a part of International Harvester) in Chicago, Illinois, USA and Louisville, Kentucky, USA from 1939 to 1947.

The Farmall B is equipped with one of two engines: a 1.9 L (113.1 cu·in) four-cylinder gasoline engine or a 1.9 L (113.1 cu·in) four-cylinder kerosene engine and sliding gear transmission with 4 forward and 1 reverse gear.

The Farmall B used manual steering, an open operator station, and 37.9 liters (10 US gal.; 8.3 Imp. gal) fuel tank.

The tractor could be equipped with the following engines:

  • International Harvester C113. It is a 1.9 L, 1,853 cm2, (113.1 cu·in) four-cylinder natural aspirated gasoline engine with 76.0 mm (2.99 in) of the cylinder bore and 102.0 mm (4.02 in) of the piston stroke. The compression ratio rating is 5.33:1.
  • International Harvester. It is a 1.9 L, 1,853 cm2, (113.1 cu·in) four-cylinder natural aspirated kerosene engine. The cylinder bore is 76.0 mm (2.99 in) and the piston stroke is 102.0 mm (4.02 in).

Farmall B Specifications

General Specifications
Model Farmall B
Length 2,740 mm (107.9 in)
Width 2,010 mm (79.1 in)
Height 1,650 mm (65 in)
Wheel base
Weight 1,088 kg (2,399 lbs)
Fuel tank capacity 37.9 liters (10 US gal.; 8.3 Imp. gal)
Battery
Cabin type Open operator station
Engine
Engine model International Harvester C113
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Gasoline
Displacement 1.9 L, 1,853 cm2, (113.1 cu·in)
Bore and stroke 76.0 mm X 102.0 mm (2.99 in X 4.02 in)
Compression ratio 5.33:1
Horsepower
Oil capacity: 4.7 L (5 US. qt, 4.1 Imp. qt.)
Coolant capacity: 12.8 L (13.5 US. qt, 11.3 Imp. qt.)
Engine
Engine model International Harvester
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Kerosene
Displacement 1.9 L, 1,853 cm2, (113.1 cu·in)
Bore and stroke 76.0 mm X 102.0 mm (2.99 in X 4.02 in)
Horsepower
Oil capacity: 4.7 L (5 US. qt, 4.1 Imp. qt.)
Coolant capacity: 12.8 L (13.5 US. qt, 11.3 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Manual
Brakes
Transmission model
Transmission type Sliding gear
Gears 4 forward and 1 reverse
Speed Forward: 16.1 kmh (10 mph) Reverse: 4.6 kmh (2.9 mph)
Tires
Front tires Ag: 6-12
Rear tires Ag: 9-24
PTO (Power take-off shaft)
Rear PTO type
Rear PTO speed 540 rpm
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*