The Farmall F30 is a 2WD row-crop tractor manufactured by Farmall (a part of International Harvester) in Rock Island, Illinois, USA from 1931 to 1939. The Farmall F30 is equipped with a 4.6 L (283.7 cu·in) four-cylinder distillate engine and a unsynchronized gear transmission with 4 forward and 1 reverse gears and dry disc clutch.
The Farmall F30 row-crop tractor used the International Harvester engine. It is a 4.6 L, 4,649 cm2, (283.7 cu·in) four-cylinder natural aspirated distillate engine with 108.0 mm (4.25 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 30.5 PS (22.4 kW; 30.0 HP) at 1,150 rpm of output power.
The Farmall F-30 is equipped with manual steering, brakes, Open operator station and 79.5 liters (21 US gal.; 17.5 Imp. gal) fuel tank.
Farmall F30 Specifications
| General Specifications | |
| Model | Farmall F-30 |
| Length | 3,730 mm (146.9 in) |
| Width | 2,280 mm (89.8 in) |
| Height | 2,050 mm (80.7 in) |
| Wheel base | – |
| Weight | 2,404 kg (5,300 lbs) |
| Fuel tank capacity | 79.5 liters (21 US gal.; 17.5 Imp. gal) |
| Battery | |
| Cabin type | Open operator station |
| Engine | |
| Engine model | International Harvester |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Distillate |
| Displacement | 4.6 L, 4,649 cm2, (283.7 cu·in) |
| Bore and stroke | 108.0 mm X 127.0 mm (4.25 in X 5 in) |
| Horsepower | 30.5 PS (22.4 kW; 30 HP) at 1150 rpm |
| Starter | Manual |
| Coolant capacity: | 34.1 L (36 US. qt, 30 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Manual |
| Brakes | |
| Transmission model | – |
| Transmission type | Unsynchronized gear with dry disc clutch |
| Gears | 4 forward and 1 reverse |
| Speed | Forward: 6.0 kmh (3.7 mph) Reverse: 4.0 kmh (2.5 mph) |
| Tires | |
| Front tires | Ag: 25×4 (steel) |
| Rear tires | Ag: 42×12 (steel) |
| PTO (Power take-off shaft) | |
| Rear PTO type | – |
| Rear PTO speed | 540 rpm |
Be the first to comment