Farmall Regular

Farmall RegularThe Farmall Regular is a 2WD row-crop tractor manufactured by Farmall (a part of International Harvester) in Chicago, Illinois, USA and Rock Island, Illinois, USA from 1924 to 1932. The Farmall Regular is equipped with a 3.6 L (221.0 cu·in) four-cylinder gasoline engine and transmission with 3 forward and 1 reverse gears.

The Farmall Regular row-crop tractor used the International Harvester engine. It is a 3.6 L, 3,622 cm2, (221.0 cu·in) four-cylinder natural aspirated gasoline engine with 95.0 mm (3.74 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke.

The Farmall Regular is equipped with a manual with the automatic engagement of turning brakes steering, an open operator station, and 49.2 liters (13 US gal.; 10.8 Imp. gal) fuel tank. This tractor was available in the Fairway version with wide steel wheels for turf.

Farmall Regular Specifications

General Specifications
Model Farmall Regular
Length 3,450 mm (135.8 in)
Width 2,180 mm (85.8 in)
Height 1,700 mm (66.9 in)
Wheel base –
Weight 1,815 kg (4,001 lbs)
Fuel tank capacity 49.2 liters (13 US gal.; 10.8 Imp. gal)
Battery –
Cabin type Open operator station
Engine
Engine model International Harvester
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Gasoline
Displacement 3.6 L, 3,622 cm2, (221.0 cu·in)
Bore and stroke 95.0 mm X 127.0 mm (3.74 in X 5 in)
Horsepower –
Starter Electric
Coolant capacity: 34.1 L (36 US. qt, 30 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Manual with automatic engagement of turning brakes
Brakes –
Transmission model –
Transmission type –
Gears 3 forward and 1 reverse
Speed Forward: 6.4 kmh (4 mph) Reverse: 4.4 kmh (2.7 mph)
Tires
Front tires Ag: 25×4 steel
Lawn/turf: 25×8 steel (Fairway)
Rear tires Ag: 40×6 steel
Lawn/turf: 40×16 steel (Fairway)
PTO (Power take-off shaft)
Rear PTO type Transmission
Rear PTO speed 535 rpm

Be the first to comment

Leave a Reply

Your email address will not be published.


*