Fendt 1050 Vario

Fendt 1050 VarioThe Fendt 1050 Vario is a 4WD row-crop tractor from the 1000 Vario series. This tractor has been manufactured by Fendt (a part of AGCO) since 2015. The Fendt 1050 Vario is equipped with a 12.4 L (757.9 cu·in) six-cylinder diesel engine and the VarioDrive transmission with infinite forward and reverse gears.

The Fendt 1050 Vario row-crop tractor used the MAN engine. It is a 12.4 L, 12,419 cm2, (758.0 cu·in) six-cylinder turbocharged and intercooled diesel engine with 126.0 mm (4.96 in) of the cylinder bore and 166.0 mm (6.54 in) of the piston stroke. This engine produced 517 PS (380 kW; 510 HP) at 1,700 rpm of output power.

The 1050 Vario is equipped with power steering, wet disc brakes, cab with air-conditioning and mechanical suspension (available pneumatic suspension system), and 800.0 liters (211.3 US gal.; 176 Imp. gal) fuel tank.

Fendt 1050 Vario Specifications

General Specifications
Model Fendt 1050 Vario
Length 6,150 mm (242.1 in)
Width 2,750 mm (108.3 in)
Height (cab) 3,440 mm (135.4 in)
Wheel base 3,290 mm (129.5 in)
Ground clearance 480 mm (18.9 in)
Weight 14,000 kg (30,865 lbs)
Fuel tank capacity 800.0 liters (211.3 US gal.; 176 Imp. gal)
Exhaust fluid (DEF) tank capacity 85.0 liters (22.5 US gal, 18.7 Imp. gal)
Battery Two 12V, 180Ah
Cabin type Cab with air-conditioning and mechanical suspension. Available pneumatic suspension system.
Engine
Engine model MAN
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 12.4 L, 12,419 cm2, (758.0 cu·in)
Bore and stroke 126.0 mm X 166.0 mm (4.96 in X 6.54 in)
Horsepower 516.8 PS (380 kW; 509.6 HP) at 1,700 rpm
Torque 2400 N·m (244.7 kg·m, 1768.8 ft·lb) at 1,500 rpm
Starter Electric
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Power
Brakes Wet disc
Transmission model
Transmission type VarioDrive
Gears Infinite forward and reverse
Speed Forward: 60.0 kmh (37.3 mph) Reverse: 33.0 (20.5 mph)
Tires
Front tires Ag: 650/65R38
Rear tires Ag: 750/75R46
Three-Point Hitch
Category IV
Control type
Lift capacity (at ends) 5,700 kg (12,570 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 1000/1000E/1300 rpm
Hydraulic system
Hydraulic type Load sensing
Pressure 2900 psi (199.9 bar)
Pump flow 43.6 gpm (165.0 lpm)
58.1 gpm (219.9 lpm)
113.6 gpm (430.0 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*