Fendt Farmer 304LS

Fendt Farmer 304LSThe Fendt Farmer 304LS is a 2WD/4WD utility tractor from the Farmer 300 series. This tractor was manufactured by the Fendt from 1985 to 1998. The Farmer 304LS is equipped with 3.1 L three-cylinders diesel engine and synchromesh transmission with 15 forward and 4 reverse gears.

The 304LS utility tractor used 3.1 L, 3,116 cm2, (190.15 cu·in) three-cylinders MWM D226 3B diesel engine with 105.0 mm (4.13 in) of cylinder bore and 120.0 mm (4.72 in) of piston stroke. This engine produced 59 PS (43.4 kW; 58.0 HP) at 2,350 rpm of maximum output power and 206 N·m (21 kg·m, 151.8 ft·lb) at 1500 rpm of peak torque.

The Fendt 304LS is equipped with hydraulic power steering, hydraulic drum brakes, cabin with heat (standard) and air-conditioning (optional), 80.0 liters (21.1 US gal.; 17.6 Imp. gal) fuel tank.

Fendt Farmer 304LS Specifications

General Specifications
Model Fendt Farmer 304LS
Length 3,790 mm (149.2 in)
Width 1,960 mm (77.2 in)
Height 2,570 mm (101.2 in)
Wheel base 2WD: 2,280 mm (89.8 in)
4WD: 2,190 mm (86.3 in)
Weight 4,700 kg (10,362 lbs)
Fuel tank capacity 80.0 liters (21.1 US gal.; 17.6 Imp. gal)
Battery 12V 88A
Cabin type Cab with heat (standard). Air-conditioning (optional)
Engine
Engine model MWM D226 3B
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 3.1 L, 3,116 cm2, (190.15 cu·in)
Bore and stroke 105.0 mm X 120.0 mm (4.13 in X 4.72 in)
Horsepower 59 PS (43.4 kW; 58 HP) at 2350 rpm
Torque 206 N·m (21 kg·m, 151.8 ft·lb) at 1500 rpm
Starter Electric
Oil capacity: 7.3 L (7.71 US. qt, 6.42 Imp. qt.)
Coolant capacity: 12.0 L (12.68 US. qt, 10.56 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Hydraulic power
Brakes Hydraulic drum
Transmission model
Transmission type Synchromesh
Gears 15 forward and 4 reverse
Speed Forward: 40 kmh (24.9 mph)
Tires
Front tires Ag: 10.00-16, 12.5-20 (4WD)
Rear tires Ag: 13.6R36
Three-Point Hitch
Caterogy
Control type
Lift capacity ,2140 kg (4,719 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO spped 540/1000; rpm
Hydraulic system
Hydraulic type Open center
Pump flow 10.6 gpm (40.1 lpm)
Steering flow 9.25 gpm (35 lpm)