The Fendt 415 Vario is a 4WD row-crop tractor from the 400 Vario series. This tractor was manufactured by Fendt (a part of AGCO) from 2006 to 2012. The Fendt 415 Vario is equipped with a 4.0 L (246.4 cu·in) four-cylinder diesel engine and continuously variable transmission with infinite forward and reverse gears.
The Fendt 415 Vario row-crop tractor used the Deutz engine. It is a 4.0 L, 4,038 cm2, (246.4 cu·in) four-cylinder turbocharged and intercooled diesel engine with101.0 mm (3.98 in) of the cylinder bore and 126.0 mm (4.96 in) of the piston stroke. This engine produced 140.1 PS (103 kW; 138.0 HP) at 2,100 rpm of net output power and 657.1 N·m (67 kg·m, 484.3 ft·lb) at 1,400 rpm.
The Fendt 415 Vario is equipped with power steering, wet disc brakes, cab (standard), and 245 liters (64.7 US gal.; 53.9 Imp. gal) fuel tank.
Following attachments are available for the Fendt 415 Vario row-crop tractor:
- Fendt 4X/75 loader
- Fendt 4X/60 loader
Fendt 415 Vario Specifications
| General Specifications | |
| Model | Fendt 415 Vario |
| Length | 4,270 mm (168.1 in) |
| Width | 2,480 mm (97.6 in) |
| Height | 2,950 mm (116.1 in) |
| Wheel base | 2,410 mm (94.9 in) |
| Ground clearance | 510 mm (20.1 in) |
| Weight | 5,420 kg (11,949 lbs) |
| Fuel tank capacity | 245 liters (64.7 US gal.; 53.9 Imp. gal) |
| Battery | 12V, 90 Ah |
| Cabin type | Cab (standard) |
| Engine | |
| Engine model | Deutz |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 4.0 L, 4,038 cm2, (246.4 cu·in) |
| Bore and stroke | 101.0 mm X 126.0 mm (3.98 in X 4.96 in) |
| Horsepower | 140.1 PS (103 kW; 138.0 HP) at 2,100 rpm |
| Torque | 657.1 N·m (67 kg·m, 484.3 ft·lb) at 1,400 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Wet disc |
| Transmission model | Vario |
| Transmission type | Continuously variable transmission |
| Gears | Infinite forward and reverse |
| Tires | |
| Front tires | Ag: 540/65R24 |
| Rear tires | Ag: 600/65R38 |
| Three-Point Hitch | |
| Category | III/II |
| Control type | – |
| Lift capacity (at ends) | 7,450 kg (16,425 lbs) |
| PTO (Power take-off shaft) | |
| Front PTO type | Independent |
| Front PTO speed | 540, 1000 rpm |
| Rear PTO type | Independent |
| Rear PTO speed | 540/540E/1000 rpm |
| Hydraulic system | |
| Hydraulic type | Load sensing |
| Pressure | 2900 psi (199.9 bar) |
| Pump flow | 19.8 gpm (75 lpm) 29.1 gpm (110.2 lpm) |
Be the first to comment