The Ford 1310 is a two-wheel (2WD) or optional four-wheel (4WD) compact utility tractor from the Ten compact series, manufactured by Japanese company Shibaura for Ford brand from 1983 to 1986. The Ford 1310 tractor is equipped with three-cylinders Shibaura S753 diesel engine with 1.0 L, 954 cc (58.2 cu-in) of displacement and gear shift transmission with 12 forward and 4 reverse gears.
The Ford 1310 tractor used a three-cylinder naturally-aspirated liquid-cooled diesel engine Shibaura S753, with 75.0 mm (2.95 in) of the cylinder bore and 72.0 mm (2.83 in) of the piston stroke. Compression ratio rating is 23.0:1. It produced 19.3 PS (14.2 kW; 19.0 HP) of gross horsepower and 16.7 PS (12.3 kW; 16.5 HP) of PTO shaft horsepower. The engine used dry air cleaner and pre-heating glow plugs.
This utility tractor is equipped with gear shift transmission with 12 forward (1.1-19.1 km/h, 0.7-11.9 mph) and 4 reverse (1.3-13.3 km/h, 0.8-8.3 mph) gears. The tractor used manual steering, differential mechanical drum brakes.
The 1310 tractor can use the following attachments:
- Mid-mount Ford 915 mower deck with 3-blades (cutting width: 1,520 mm (60 in.)
- Rear-mount Ford 930A mower deck with 3-blades with hydraulic lift (cutting width: 1,220 mm (48 in.)
- Rear-mount Ford 930A mower deck with 3-blades with hydraulic lift (cutting width: 1,220 mm (59 in.)
- Rear-mount Ford 715 snow blower with hydraulic lift (clearing width: 1,220 mm (48 in.)
- Rear-mount Ford 715 snow blower with hydraulic lift (clearing width: 1,520 mm (60 in.)
- Front-end loader Ford 770A/B
- Backhoe Ford 757A
The Ford 1310 used a rollover protection structure (ROPS) for operators. The tractor has rear PTO shaft with 540 rpm, front PTO was available as an option.
Ford 1310 specifications
| General Specifications | |
| Model | Ford 1310 |
| Length | – |
| Width | – |
| Height | – |
| Wheelbase | 1,600 mm (63.0 in.) |
| Ground clearance | – |
| Weight | 964 kg (2127 lb.) |
| Fuel tank capacity | 26.6 L (7.0 US gal.) |
| Battery | 12V |
| Engine | |
| Engine model | Shibaura S753 |
| Number of Cylinders | 3 |
| Firing order | 1-2-3 |
| Fuel | Diesel |
| Displacement | 1.0 L, 954 cc (58.2 cu.in.) |
| Bore x stroke | 75.0 x 72.0 mm (2.95 x 2.83 in) |
| Power output | Gross: 19.3 PS (14.2 kW; 19.0 HP) PTO: 16.7 PS (12.3 kW; 16.5 HP) |
| Torque | – |
| Starter type | Electric starter |
| Oil type | – |
| Governed Speeds | Low Idle: 750-850 rpm; High Idle: 2,950-3,000 rpm; (no load) Rated: 2,800 rpm (full load) |
| Oil capacity | 3.8 L (4.0 U.S. qt) |
| Coolant capacity | 2.7 L (2.8 U.S. qt) |
| Injection Timing, B.T.D.C. | 20°-21° |
| Valve clearance | Intake: 0.20 mm (0.008 in.) Exhaust: 0.20 mm (0.008 in.) |
| Tires size | |
| Front tires | Ag (2WD): 4.00-12 Ag (4WD): 6.00-12 |
| Rear tires | Ag (2WD): 8.3-24 Ag (4WD): 12.4-16 or 13.6-28 |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD (opton) |
| Steering | Manual |
| Transmission type | Gear shift |
| Gears | 12 forward and 4 reverse |
| Ground speed | Forward: up to 19.1 km/h (11.9 mph) Reverse: up to 13.3 km/h (8.3 mph) |
| PTO (Power take-off shaft) | |
| PTO Type: | Rear, transmission or live (option) Front (option) |
| PTO Speed: | Rear: 540 rpm |
| Hydraulic lift | |
| 3-point linkage: | Category I |
| Control system: | – |
| No. of remote valves: | – |
| Max lifting capacity (at link end): | 649 kg (1,432 lb.) |
| Hydraulic system | |
| Type | Live |
| Total flow | – |
| Oil capacity (Transmission, Rear Axle and Hydraulic System) | 18.0 L (19.0 US. qt.) |
| Front axle differential case | 2.4 L (2.5 U.S. qt.) |
| Front axle reduction case (Each) | 0.22 L (0.23 U.S. qt.) |
Be the first to comment