Ford 2110

Ford 2110The Ford 2110 is a two-wheel (2WD) or optional four-wheel (4WD) compact utility tractor, manufactured by Japanese company Shibaura for Ford brand from 1983 to 1987. The Ford 2110 tractor is equipped with four-cylinders Shibaura T854B diesel engine with 2.3 L, 2,268 cc (138.4 cu-in) of displacement and manual transmission with 12 forward and 4 reverse gears.

The Ford 2110 tractor used a four-cylinder naturally-aspirated liquid-cooled diesel engine Shibaura T854B, with 85.0 mm (3.35 in) of the cylinder bore and 100.0 mm (3.94 in) of the piston stroke. Compression ratio rating is 21.0:1. It produced 38.5 PS (28.3 kW; 38.0 HP) of gross horsepower and 35.2 PS (25.9 kW; 34.7 HP) of PTO shaft horsepower. The engine used dry air cleaner and pre-heating glow plugs.

The Ford 2110 utility tractor is equipped with manual transmission with 12 forward (1.7-28.3 km/h, 1.1-17.6 mph) and 4 reverse (2.0-21.3 km/h, 1.2-13.3 mph) gears. The tractor used power steering and differential mechanical drum brakes.

The 2110 tractor can use the following attachments:

  • Rear-mount Ford 715 snow blower with hydraulic lift (clearing width: 1,520 mm (60 in.)
  • Front-end loader Ford 776A/B
  • Backhoe Ford 785A

The Ford 2110 used a two-post rollover protection structure (ROPS) for operators. The tractor has rear PTO shaft with 540 rpm, front PTO was available as an option.

Ford 2110 specifications

General Specifications
ModelFord 2110
Wheelbase1,850 mm (73.2 in.)
Ground clearance
Weight1,610 kg (3,550 lb.) operating
Fuel tank capacity40.0 L (10.6 US gal.)
Engine modelShibaura T854B
Number of Cylinders3
Firing order1-3-4-2
Displacement2.3 L, 2,268 cc (138.4
Bore x stroke85.0 x 100.0 mm (3.35 x 3.94 in)
Power output Gross: 38.5 PS (28.3 kW; 38.0 HP)
PTO: 35.2 PS (25.9 kW; 34.7 HP)
Starter typeElectric starter
Oil type
Governed Speeds Low Idle: 750-850 rpm;
High Idle: 2,650-2,700 rpm; (no load)
Rated: 2,500 rpm (full load)
Oil capacity7.5 L (7.9 U.S. qt)
Coolant capacity8.5 L (9.1 U.S. qt)
Injection Timing, B.T.D.C.23.5°-24.5°
Injector opening pressure11,760 kPa (1,705 psi)
Valve clearance Intake: 0.30 mm (0.012 in.)
Exhaust: 0.30 mm (0.012 in.)
Tires size
Front tires Ag (2WD): 6.00-16
Ag (4WD): 8.00-18
Lawn/turf (2WD): 25×8.50-14
Lawn/turf (4WD): 27×8.50-15
Rear tires Ag: 13.6-28
Lawn/turf: 18.4×16.1
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD (opton)
Transmission typeGear shift
Gears12 forward and 4 reverse
Ground speed Forward: up to 29.3 km/h (17.6 mph)
Reverse: up to 21.3 km/h (13.3 mph)
PTO (Power take-off shaft)
PTO Type: Rear, live
Front (optional)
PTO Speed:Rear: 540 rpm
Hydraulic lift
3-point linkage:Category I
Control system:
No. of remote valves:
Max lifting capacity (at link end):
Hydraulic system
Total flow
Oil capacity (Transmission, Rear Axle and Hydraulic System)32.2 L (34.0 US. qt.)
Front axle differential case5.2 L (5.5 U.S. qt.)
Front axle reduction case (Each)0.22 L (0.23 U.S. qt.)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.