Ford 2810

Ford 2810The Ford 2810 is a 2WD or 4WD utility tractor from the 10 Utility series. This tractor was manufactured by Ford from 1983 to 1990. The Ford 2810 is equipped with a 2.6 L (158.0 cu·in) three-cylinder diesel engine and one of two transmissions: a dual range transmission with 8 forward and 2 reverse gears or a mechanical shuttle transmission with 6 forward and 4 reverse gears.

The Ford 2810 utility tractor used the Ford engine. It is a 2.6 L, 2,589 cm2, (158.0 cu·in) three-cylinder natural aspirated diesel engine with 107.0 mm (4.21 in) of the cylinder bore and 97.0 mm (3.82 in) of the piston stroke. The compression ratio rating is 17.3:1. This engine produced 34.8 PS (25.6 kW; 34.3 HP) at 2,000 rpm of output power.

The Ford 2810 is equipped with manual or power assist steering, differential wet disc brakes, an open operator station with two-post fixed ROPS, and 49.2 liters (13 US gal.; 10.8 Imp. gal) fuel tank for 2WD version or 60.6 liters (16 US gal, 13.3 Imp. gal) for 4WD version.

Following attachments are available for the Ford 2810 utility tractor:

  • Ford 776A loader
  • Ford 776B loader
  • Ford 776F loader

Ford 2810 Specifications

General Specifications
Model Ford 2810
Length 3,230 mm (127.2 in)
Width 1,730 mm (68.1 in)
Height (ROPS) 2,370 mm (93.3 in)
Wheel base 2WD: 1,960 mm (77.2 in)
4WD: 2,130 mm (83.9 in)
Ground clearance (rear axle) 520 mm (20.5 in)
Weight
Fuel tank capacity 2WD: 49.2 liters (13.0 US gal.; 10.8 Imp. gal)
4WD: 60.6 liters (16.0 US gal, 13.3 Imp. gal)
Battery 12V, 51Ah
Cabin type Open operator station with two-post fixed ROPS
Engine
Engine model Ford
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 2.6 L, 2,589 cm2, (158.0 cu·in)
Bore and stroke 107.0 mm X 97.0 mm (4.21 in X 3.82 in)
Compression ratio 17.3:1
Horsepower 34.8 PS (25.6 kW; 34.3 HP) at 2,000 rpm
Torque 137.0 N·m (14.0 kg·m, 101.0 ft·lb) at 1,400 rpm
Starter Electric
Oil capacity: 6.6 L (7 US. qt, 5.8 Imp. qt.)
Coolant capacity: 10.4 L (11 US. qt, 9.2 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Manual or power assist
Brakes Differential wet disc
Final drive Inboard planetary
Differential lock Mechanical rear
Transmission model
Transmission type Dual Range
Gears 8 forward and 2 reverse
Speed Forward: 29.8 kmh (18.5 mph) Reverse: 14.3 kmh (8.9 mph)
Transmission oil capacity 12.0 L (3.2 US. gal, 2.6 Imp. gal.)
Transmission model
Transmission type Mechanical shuttle
Gears 6 forward and 4 reverse
Speed Forward: 28.8 kmh (17.9 mph) Reverse: 25.9 kmh (16.1 mph)
Tires
Front tires Ag: 6.00-16 (2WD), 8.3-24 (4WD)
Rear tires Ag: 13.6-28
Three-Point Hitch
Category I
Control type Position control
Lift capacity (at ends) 1,330 kg (2,935 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 45.8 L (12.1 US. gal, 10.1 Imp. gal.)
Pressure 2500 psi (172.4 bar)
Pump flow 7.7 gpm (29.1 lpm)