Ford 7000

Ford 7000The Ford 7000 is a 2WD utility tractor manufactured by Ford from 1971 to 1975. The Ford 7000 is equipped with a 4.2 L (255.4 cu·in) four-cylinder diesel engine and one of two transmissions: a constant mesh transmission with 8 forward and 2 reverse gears or a dual power transmission with 16 forward and 4 reverse gears.

The Ford 7000 utility tractor used the Ford engine. It is a 4.2 L, 4,195 cm2, (256 cu·in) four-cylinder turbocharged diesel engine with 112.0 mm (4.41 in) of the cylinder bore and 107.0 mm (4.21 in) of the piston stroke. The compression ratio rating is 16.5:1. This engine produced 90.3 PS (66.4 kW; 89.0 HP) at 2,100 rpm of output power.

The Ford 7000 is equipped with manual or hydrostatic power (optional) steering, brakes, Open operator station and 75.7 liters (20 US gal.; 16.7 Imp. gal) fuel tank.

Ford 7000 Specifications

General Specifications
Model Ford 7000
Length 3,590 mm (141.3 in)
Width 1,730 mm (68.1 in)
Height (hood) 1,540 mm (60.6 in)
Wheel base 2,220 mm (87.4 in)
Ground clearance (front axle) 450 mm (17.7 in)
Weight (operating) 2,857 kg (6,299 lbs)
Fuel tank capacity 75.7 liters (20 US gal.; 16.7 Imp. gal)
Battery 12V, 128Ah
Cabin type Open operator station
Engine model Ford
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 4.2 L, 4,195 cm2, (256 cu·in)
Bore and stroke 112.0 mm X 107.0 mm (4.41 in X 4.21 in)
Compression ratio 16.5:1
Horsepower 90.3 PS (66.4 kW; 89.0 HP) at 2,100 rpm
Starter Electric
Oil capacity: 8.5 L (9 US. qt, 7.5 Imp. qt.)
Coolant capacity: 13.7 L (14.5 US. qt, 12.1 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Manual or hydrostatic power (optional)
Transmission model
Transmission type Constant mesh
Gears 8 forward and 2 reverse
Speed Forward: 27.0 kmh (16.8 mph) Reverse: 13.0 kmh (8.1 mph)
Transmission oil capacity 52.1 L (13.8 US. gal, 11.5 Imp. gal.)
Transmission model
Transmission type Dual Power
Gears 16 forward and 4 reverse
Front tires Ag: 6.00-16
Rear tires Ag: 13.6-38, 12.4-36
Three-Point Hitch
Category II
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540, 540/1000 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic pressure 2500 psi (172.4 bar)
Valves 2
Pump flow 6.0 gpm (22.7 lpm)
Steering flow 2.74 gpm (10.4 lpm)
Total flow 8.74 gpm (33.1 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.