The Honda Harmony H2113 is a lawn tractor with small vertical general-purpose Honda GXV390 engine (389 cc, 23.7 cu-in) and 974 mm (38 in.) belt driven twin blade mower deck that is adjustable for cutting heights between 25 mm (1 in.) and 96 mm (4 in). The Honda H2113 lawn tractor was produced since 1988.
The Honda GXV390 is air-cooled single-cylinder four-stroke gasoline engine with vertical PTO shaft. The GXV390 engine has a OHV design with two valves; sophisticated air intake system and multi-chamber exhaust system. An 88.0 mm (3.46 in) cylinder bore and 64.0 mm (2.5 in) piston stroke give the motor a total of 389 cc (23.7 cu-in) of displacement. Compression ratio rating is 7.7:1. The Honda GXV390 motor produces 13.0 HP (9.7 kW) at 3,600 rpm and 28.0 Nm (2.8 kg·m, 20.3 ft·lb) of torque at 2,500 rpm.
The Honda H2113 is available in two versions:
- H2113GDA – model with gear transmission and side-discharge;
- H2113HDA – model hydrostatic transmission and side-discharge;
The gear type transmission uses parallel shaft, constant mesh and sliding key. The gear transmission has five forward gears from 2.4 km/h to 7.3 km/h (1.5 mph to 4.5 mph), neutral gear and single reverse gear 3.6 km/h (2.2 mph).
The hydrostatic transmission has three approximate ground speeds: Reverse from 0 to 3.6 km/h (0-2.2 mph), Mowing from 0 to 5.2 km/h (0-3.2 mph) and Transport from 5.2 to 7.3 km/h (3.2-4.5 mph)
Honda H2113 Specifications
| General Specifications | |
| Model | Honda H2113GDA / H2113HDA |
| Length | 1730 mm (68.2 in) |
| Width | 910 mm (35.8 in) Tractor width with mower deck: 1250 mm (49 in.) |
| Height | 1030 mm (40.5 in) |
| Wheel base | 1135 mm (45.0 in.) |
| Dry weight (without tines) | H2113SDA: 154.0 kg (340.0 lbs) H2113HDA: 170.0 kg (375.0 lbs) CD2038 mower deck: 37.5 kg (83 lbs) |
| Front tires size | 13×6.5-6 |
| Front tires pressure | 98 kPa (1.0 kg/cm2, 14 psi) |
| Rear tires size | 18×8.5-8 |
| Rear tires pressure | 69 kPa (0.7 kg/cm2, 10 psi) |
| Engine | |
| Engine model | Honda GXV390 |
| Displacement | 389 cm3 (23.7 cu-in) |
| Bore x stroke | 88.0 X 64.0 mm (3.46 x 2.5 in) |
| Max. horsepower | 13.0 HP (9.7 kW) at 3600 rpm |
| Max. torque | 28.0 Nm (2.8 kg·m, 20.3 ft·lb) at 2,500 rpm |
| Carburetor | Horizontal type, butterfly valve |
| Cooling system | Forced-air |
| Ignition system | Transistorized magneto ignition |
| Lubricating system | Pressure and splash |
| Starting system | Electric starter |
| Stoping system | Ignition primary circuit ground |
| Fuel used | Unleaded gasoline (octane number 86 or higher) |
| Fuel tank capacity | 5.3 l (1.3 US gal.) |
| Spark plug | NGK: BPR5ES NIPPONDENSO: W16EPR-U |
| Oil type | Honda 4-stroke or an equivalent (SF or SG) |
| Recommended oil | SAE 10W-30 |
| Oil capacity | 1.1 L (1.2 US gal, 1.0 lmp qt) |
| Gear type transmission | |
| Gear type | Parallel shaft, constant mesh, sliding key |
| Gear selections | Five forward, one reverse |
| Groung speeds | First: 2.4 km/h (1.4 mph) Second: 3.1 km/h (2.0 mph) Third: 4.9 km/h (3.0 mph) Fourth: 6.2 km/h (3.9 mph) Fifth: 7.3 km/h (4.5 mph) Reverse: 3.6 km/h (2.3 mph) |
| Hydrostatic type transmission | |
| Hydrostatic type | Hydrostatic,fluid drive |
| Groung speeds | Reverse: 0-3.4 km/h (0-2.1 mph) Mowing: 0-5.2 km/h (0-3.2 mph) Transport: 5.2-7.3 km/h (3.3-4.5 mph) |
| Mower Deck | |
| Type | Twin blade, belt drive, four-point link, dual anti-scalp rollers, side discharge model |
| Deck size | 974 mm (38 in.) |
| Height range | 25-96 mm (1-4 in.) |
| Blade brake | Mechanical Arms |
| Adjustments | Left-right and front-rear, height adjustment splus anti-scalp roller height adjustments |
Be the first to comment