J.I. Case 1490

J.I. Case 1490The J.I. Case 1490 is a 2WD/4WD utility tractor from the 90 series. This tractor was manufactured by David Brown in Meltham Mills, Huddersfield, England from 1980 to 1983. The J.I. Case 1490 is equipped with a 3.6 L (219.0 cu·in) four-cylinder diesel engine and one of two transmissions: a synchromesh transmission with 12 forward and 4 reverse gears and hydraulic dry disc clutch or a partial power shift transmission with 12 forward and 4 reverse gears and hydraulic dry disc clutch.

The J.I. Case 1490 utility tractor used the J.I. Case engine. It is a 3.6 L, 3,589 cm2, (219.0 cu·in) four-cylinder turbocharged diesel engine with 100.0 mm (3.94 in) of the cylinder bore and 114.0 mm (4.49 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 84.2 PS (61.9 kW; 83.0 HP) at 2,200 rpm of output power.

The J.I. Case 1490 is equipped with hydrostatic power steering, hydraulic wet disc brakes, two-post ROPS or cab (optional), and 136.3 liters (36 US gal.; 30 Imp. gal) fuel tank.

J.I. Case 1490 Specifications

General Specifications
ModelJ.I. Case 1490
Length3,630 mm (142.9 in)
Width1,940 mm (76.4 in)
Height2,660 mm (104.7 in)
Wheel base2,240 mm (88.2 in)
Ground clearance 2WD: 530 mm (20.9 in)
4WD: 330 mm (13.0 in)
Weight (shipping) 2WD ROPS: 2,950 kg (6,504 lbs)
2WD Cab: 3,440 kg (7,584 lbs)
Fuel tank capacity136.3 liters (36 US gal.; 30 Imp. gal)
Battery12V
Cabin typeTwo-post ROPS or Cab (optional)
Engine
Engine modelJ.I. Case
Engine typeFour-stroke, liquid-cooled, inline
Cylinders4
Fuel typeDiesel
Displacement3.6 L, 3,589 cm2, (219.0 cu·in)
Bore and stroke100.0 mm X 114.0 mm (3.94 in X 4.49 in)
Compression ratio16.0:1
Horsepower84.2 PS (61.9 kW; 83.0 HP) at 2,200 rpm
StarterElectric
Oil capacity:7.4 L (7.8 US. qt, 6.5 Imp. qt.)
Coolant capacity:14.2 L (15 US. qt, 12.5 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD
Steering typeHydrostatic power
BrakesHydraulic wet disc
Transmission model
Transmission typeSynchromesh with hydraulic dry disc clutch
Gears12 forward and 4 reverse
Transmission model
Transmission typePartial power shift with hydraulic dry disc clutch
Gears12 forward and 4 reverse
Tires
Front tires Ag: 11L-15
Rear tires Ag: 18.4-34
Three-Point Hitch
CategoryII
Control type
Lift capacity (at ends)1,995 kg (4,400 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO speed540/1000 rpm
Hydraulic system
Hydraulic typeOpen center
Pressure2000 psi (137.9 bar)
Valves1
Total flow8.4 gpm (31.8 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*