J.I. Case 1594

J.I. Case 1594The J.I. Case 1594 is a 2WD or 4WD utility tractor from the 94 series. This tractor was manufactured by J.I. Case in Meltham Mills, Huddersfield, England from 1983 to 1984. The J.I. Case 1594 is equipped with a 5.4 L (329.0 cu·in) six-cylinder diesel engine and one of two transmissions: a synchromesh transmission with 12 forward and 4 reverse gears or a partial power shift transmission with 12 forward and 4 reverse gears.

The J.I. Case 1594 utility tractor used the Case engine. It is a 5.4 L, 5,391 cm2, (329.0 cu·in) six-cylinder natural aspirated diesel engine with 100.0 mm (3.94 in) of the cylinder bore and 114.0 mm (4.49 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 98.3 PS (72.3 kW; 97.0 HP) at 2,300 rpm of output power.

The J.I. Case 1594 is equipped with hydrostatic power steering, differential hydraulic wet disc brakes, ROPS or cab, and 136.3 liters (36 US gal.; 30 Imp. gal) fuel tank.

J.I. Case 1594 Specifications

General Specifications
ModelJ.I. Case 1594
Width1,980 mm (78 in)
Height (cab)2,710 mm (106.7 in)
Wheel base2,540 mm (100 in)
Ground clearance 2WD: 400 mm (15.7 in)
4WD: 380 mm (15 in)
Weight 2WD Cab: 4,215 kg (9,292 lbs)
Fuel tank capacity136.3 liters (36 US gal.; 30 Imp. gal)
Battery12V, CCA: 420A or 550A (heavy duty)
Cabin typeROPS or cab
Engine modelCase
Engine typeFour-stroke, liquid-cooled, inline
Fuel typeDiesel
Displacement5.4 L, 5,391 cm2, (329.0 cu·in)
Bore and stroke100.0 mm X 114.0 mm (3.94 in X 4.49 in)
Compression ratio16.0:1
Horsepower98.3 PS (72.3 kW; 97.0 HP) at 2,300 rpm
Torque329.1 N·m (33.6 kg·m, 242.5 ft·lb) at 1,425 rpm
Oil capacity:12.5 L (13.2 US. qt, 11 Imp. qt.)
Coolant capacity:15.3 L (16.2 US. qt, 13.5 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD
Steering typeHydrostatic power
BrakesDifferential hydraulic wet disc
Transmission model
Transmission typeSynchromesh
Gears12 forward and 4 reverse
Transmission oil capacity31.8 L (8.4 US. gal, 7 Imp. gal.)
Transmission modelHydra-Shift
Transmission typePartial power shift
Gears12 forward and 4 reverse
Transmission oil capacity31.8 L (8.4 US. gal, 7 Imp. gal.)
Front tires Ag: 10.00-16 (2WD), 13.6-24 or 13.6-28 (4WD)
Rear tires Ag: 16.9-38, 18.4-34, 14.9-24, 18.6-38
Three-Point Hitch
Control type
Lift capacity (at ends)3,375 kg (7,440 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO speed540/1000 rpm
Hydraulic system
Hydraulic typeOpen center
Pressure2600 psi (179.3 bar)
Steering flow7.7 gpm (29.1 lpm)
Total flow 10.5 gpm (39.7 lpm)
Tandem: 20.1 gpm (76.1 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.