J.I. Case 1690

J.I. Case 1690The J.I. Case 1690 is a 2WD or 4WD utility tractor from the 90 series. This tractor was manufactured by J.I. Case in Meltham Mills, Huddersfield, England from 1980 to 1983. The J.I. Case 1690 is equipped with a 5.4 L (329.0 cu·in) six-cylinder diesel engine and one of two transmissions: a synchromesh transmission with 12 forward and 4 reverse gears and hydraulic dry disc clutch or a partial power shift transmission with 12 forward and 4 reverse gears and hydraulic dry disc clutch .

The Case 1690 utility tractor used the J.I. Case engine. It is a 5.4 L, 5,391 cm2, (329.0 cu·in) six-cylinder natural aspirated diesel engine with 100.0 mm (3.94 in) of the cylinder bore and 114.0 mm (4.49 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 91.3 PS (67.1 kW; 90.0 HP) at 2,200 rpm of PTO output power.

The Case 1690 is equipped with power steering, hydraulic wet disc brakes, two-post ROPS or cab (optional), and 98.4 liters (26 US gal.; 21.6 Imp. gal) fuel tank.

J.I. Case 1690 Specifications

General Specifications
ModelJ.I. Case 1690
Wheel base2,550 mm (100.4 in)
Weight (operating) 4WD ROPS: 3,970 kg (8,752 lbs)
Fuel tank capacity98.4 liters (26 US gal.; 21.6 Imp. gal)
Cabin typeTwo-post ROPS or Cab (optional)
Engine modelJ.I. Case
Engine typeFour-stroke, liquid-cooled, inline
Fuel typeDiesel
Displacement5.4 L, 5,391 cm2, (329.0 cu·in)
Bore and stroke100.0 mm X 114.0 mm (3.94 in X 4.49 in)
Compression ratio16.0:1
Horsepower91.3 PS (67.1 kW; 90.0 HP) at 2,200 rpm
Coolant capacity:15.0 L (15.9 US. qt, 13.2 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD
Steering typePower
BrakesHydraulic wet disc
Transmission model
Transmission typeSynchromesh with hydraulic dry disc clutch
Gears12 forward and 4 reverse
Speed Forward: 24.3 kmh (15.1 mph) Reverse: 14.3 (8.9 mph)
Transmission model
Transmission typePartial power shift with hydraulic dry disc clutch
Gears12 forward and 4 reverse
Front tires Ag: 10.00-16
Rear tires Ag: 18.4-34
Three-Point Hitch
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO speed540/1000 rpm
Hydraulic system
Hydraulic typeOpen center
Pump flow20.0 gpm (75.7 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.