J.I. Case 2290

J.I. Case 2290The J.I. Case 2290 is a 2WD or 4WD row-crop tractor from the 90 series. This tractor was manufactured by J.I. Case in Racine, Wisconsin, USA from 1979 to 1983. The J.I. Case 2290 is equipped with a 8.3 L (504.0 cu·in) six-cylinder diesel engine and two transmissions variants.

The Case 2290 row-crop tractor used the J.I. Case engine. It is a 8.3 L, 8,259 cm2, (504.0 cu·in) six-cylinder turbocharged diesel engine with 117.0 mm (4.61 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 15.75:1. This engine produced 130.8 PS (96.2 kW; 129.0 HP) at 2,100 rpm of PTO output power.

The J.I. Case 2290 is equipped with hydrostatic power steering, differential hydraulic wet disc brakes, four-post ROPS, or Silent Guardian cab (optional), and 246.0 liters (65 US gal.; 54.1 Imp. gal) fuel tank.

J.I. Case 2290 Specifications

General Specifications
Model J.I. Case 2290
Length 4,450 mm (175.2 in)
Width –
Height (cab) 2,920 mm (115 in)
Wheel base –
Ground clearance 400 mm (15.7 in)
Weight ROPS: 4,570 kg (10,075 lbs)
Cab: 4,720 kg (10,406 lbs)
Fuel tank capacity 246.0 liters (65 US gal.; 54.1 Imp. gal)
Battery 12V
Cabin type Four-post ROPS or Silent Guardian cab (optional)
Engine
Engine model J.I. Case
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 8.3 L, 8,259 cm2, (504.0 cu·in)
Bore and stroke 117.0 mm X 127.0 mm (4.61 in X 5 in)
Compression ratio 15.75:1
Horsepower 130.8 PS (96.2 kW; 129.0 HP) at 2,100 rpm
Starter Electric
Coolant capacity: 36.0 L (38 US. qt, 31.7 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD (optional)
Steering type Hydrostatic power
Brakes Differential hydraulic wet disc
Transmission model –
Transmission type –
Gears 8 forward and 4 reverse
Speed Forward: 25.1 kmh (15.6 mph) Reverse: 22.0 (13.7 mph)
Transmission model –
Transmission type Partial power shift
Gears 12 forward and 3 reverse
Speed Forward: 29.1 kmh (18.1 mph) Reverse: 13.0 (8.1 mph)
Tires
Front tires Ag: 10.00-16
Rear tires Ag: 18.4-34
Three-Point Hitch
Category II
Control type –
Lift capacity (at ends) –
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540/1000 rpm
Hydraulic system
Hydraulic type Closed center
Valves 2
Pump flow 21.0 gpm (79.5 lpm)

Be the first to comment

Leave a Reply

Your email address will not be published.


*